[Thu Jun  7 10:27:26 2012] Detection parameters:
  Position = (281.2, 283.9) = 3 35 28.59 -25 44 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2172.4 +/- 57.2
  Background counts = 65.8
  Rate = 0.08 +/- 0.002

[Thu Jun  7 10:27:26 2012] Off-axis axis estimate = 1.63'
[Thu Jun  7 11:03:48 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 11:03:48 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Jun  7 11:03:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Jun  7 11:03:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 11:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  7 11:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:25:10 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.056800 pixels away
[Thu Jun  7 11:25:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:25:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:25:10 2012] Assessing source extent using major
[Thu Jun  7 11:25:10 2012] Source does appear to be extended
[Thu Jun  7 11:25:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 11:51:45 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 11:51:45 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Jun  7 11:51:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Jun  7 11:51:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24"
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 12:11:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 12:11:09 2012] Fit fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 12:11:20 2012] Spatial fit model total counts = 1664.520000, observed total counts = 1583.000000
[Thu Jun  7 12:11:20 2012] Offset between fit and detection position for source 1 = 0.056045 pixels
[Thu Jun  7 12:11:20 2012] 1668.948000 total counts/ 527.018000 bgd. counts: snr = 49.742403
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.056045 pixels
  Position = (281.2, 283.9) = 3 35 28.60 -25 44 21.7
  Extent = 5.0 (4.7-5.2)", rotation angle = 0
  Source counts = 1141.9 +/- 40.9
  Background counts = 527.0
  Rate = 0.05 +/- 0.002
[Thu Jun  7 12:11:20 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:11:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:11:20 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 12:11:20 2012] Source does appear to be extended
[Thu Jun  7 12:11:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:51:25 2012] Counts = 1141.930000, rescaling region sizes by 2.000000
[Thu Jun  7 12:51:25 2012] XMMSAS src. selection expression = ellipse(24414.797320, 24650.201200, 595.908017, 595.908017, 0.000000, X, Y)
[Thu Jun  7 12:51:25 2012] Writing source region out to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 12:51:25 2012] Extracting stamp from image fullrun_mos2_xmm0111320101_pi300-10000_cl_sm2.00.img.gz, (247, 250) - (315, 318)
[Thu Jun  7 12:51:25 2012] XMMSAS bgd. selection expression = annulus(24414.797320, 24650.201200, 1986.360057, 3972.720114, X, Y) && !ellipse(23454.208782, 27776.417837, 647.190766, 374.992398, 18.684006, X, Y)
[Thu Jun  7 12:51:25 2012] Writing fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 12:51:29 2012] Mean detx,y = (118.68, 13.98) 
[Thu Jun  7 12:51:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 12:52:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 12:52:24 2012] Setting source spectrum file to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 12:52:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  7 13:09:34 2012] Updating aperture counts using extracted products
[Thu Jun  7 13:09:34 2012] Error reading totcts from fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 13:09:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 13:09:35 2012] Using photon index=1.80, rate=0.0518, arf fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 13:09:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 13:09:35 2012] Updating source flux to 5.4e-13
[Thu Jun  7 13:10:46 2012] Reading fit data from xmm0111320101/analysis//spectral/fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun  7 13:10:46 2012] Spectral fit parameter nH value = 1.62511e+12
[Thu Jun  7 13:10:46 2012] Spectral fit parameter PhoIndex value = 1.62523
[Thu Jun  7 13:10:46 2012] Failed to get F(0.3-8.0) from xmm0111320101/analysis//spectral/fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun  7 13:10:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 13:10:46 2012] Using Nh = 1.6e+12, photon index=1.63, rate=0.0518, arf fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 13:10:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 13:10:46 2012] Updating source flux to 5.9e-13