[Sun May 26 01:01:49 2013] Detection parameters:
  Position = (193.5, 169.8) = 19 40 39.76 -31 8 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.5 +/- 17.9
  Background counts = 30.2
  Rate = 0.007 +/- 0.0008

[Sun May 26 01:01:50 2013] Off-axis axis estimate = 12.03'
[Sun May 26 01:05:16 2013] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Sun May 26 01:05:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 01:05:16 2013] Initial guess for spatial extent in simple fitting = 12.45"
[Sun May 26 01:05:16 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084
[Sun May 26 01:05:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.45"
[Sun May 26 01:40:19 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 26 01:40:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1.csv
[Sun May 26 01:40:19 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 26 01:40:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1.csv
[Sun May 26 01:40:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 01:40:19 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 26 01:40:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 01:40:19 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 26 01:40:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 01:40:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111300101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 02:43:53 2013] Spatial fit model total counts = 534.288000, observed total counts = 430.000000
[Sun May 26 02:43:53 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 02:43:53 2013] Vigneting correction estimate = 1.000000
[Sun May 26 02:43:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 02:43:53 2013] Assessing source extent using major
[Sun May 26 02:43:53 2013] Source does appear to be extended
[Sun May 26 02:43:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:44:16 2013] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Sun May 26 02:44:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 02:44:16 2013] Initial guess for spatial extent in simple fitting = 12.45"
[Sun May 26 02:44:16 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084
[Sun May 26 02:44:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.45"
[Sun May 26 03:17:49 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 26 03:17:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1.csv
[Sun May 26 03:17:49 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 26 03:17:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1.csv
[Sun May 26 03:17:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 03:17:49 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 26 03:17:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 03:17:49 2013] fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 26 03:17:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 03:17:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111300101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 04:23:41 2013] Spatial fit model total counts = 534.294000, observed total counts = 430.000000
[Sun May 26 04:23:41 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 04:23:41 2013] Vigneting correction estimate = 1.000000
[Sun May 26 04:23:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 04:23:41 2013] Assessing source extent using major
[Sun May 26 04:23:41 2013] Source does appear to be extended
[Sun May 26 04:23:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 04:24:05 2013] XMMSAS src. selection expression = ellipse(16785.527405, 14726.715469, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 04:24:05 2013] Writing source region out to fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_src.reg
[Sun May 26 04:24:05 2013] Extracting stamp from image fullrun_pn_xmm0111300101_pi300-10000_cl_sm2.00.img.gz, (156, 132) - (231, 207)
[Sun May 26 04:24:05 2013] XMMSAS bgd. selection expression = annulus(16785.527405, 14726.715469, 1087.500000, 2175.000000, X, Y) && !ellipse(18815.069200, 15282.421600, 797.600823, 330.804010, 31.918416, X, Y) && !ellipse(18692.915054, 17318.812607, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 04:24:05 2013] Writing fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1.gif
[Sun May 26 04:24:18 2013] Mean detx,y = (-8579.33, 13801.89) 
[Sun May 26 04:24:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:24:55 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:24:55 2013] Setting source spectrum file to fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 26 04:24:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 26 04:41:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 04:41:59 2013] rmf not generated due to insufficient counts
[Sun May 26 05:34:50 2013] Updating aperture counts using extracted products
[Sun May 26 05:34:50 2013] Total counts from fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 246.00
[Sun May 26 05:34:50 2013] Total counts from fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 589.00
[Sun May 26 05:34:50 2013] Got source and background scale factors 1301915.000000, 3918047.000000
[Sun May 26 05:34:50 2013] User source parameters:
  Position = (193.5, 169.8) = 19 40 39.76 -31 8 15.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.3 +/- 16.7
  Background aperture counts = 195.7
  Rate = 0.002 +/- 0.0008

[Sun May 26 05:34:50 2013] Updating counts from extracted products
[Sun May 26 05:34:50 2013] Set source signif. to 50.28/13.99 = 3.59
[Sun May 26 05:34:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 05:34:57 2013] Using photon index=1.80, rate=0.00239, arf fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1.arf
[Sun May 26 05:34:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 05:34:57 2013] Updating source flux to 2.3e-14
[Sun May 26 05:35:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 05:35:24 2013] xmm0111300101/analysis//spectral/fullrun_pn_xmm0111300101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete