[Sat Jun 16 16:11:48 2012] Detection parameters:
  Position = (242.9, 160.8) = 12 19 36.00 6 30 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.5 +/- 9.2
  Background counts = 7.8
  Rate = 0.005 +/- 0.001

[Sat Jun 16 16:11:48 2012] Off-axis axis estimate = 10.76'
[Sat Jun 16 17:13:54 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:13:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 17:13:54 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Sat Jun 16 17:13:54 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Sat Jun 16 17:13:54 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.81"
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 17:29:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 17:29:33 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 16 17:29:43 2012] Spatial fit model total counts = 125.278000, observed total counts = 122.000000
[Sat Jun 16 17:29:43 2012] Offset between fit and detection position for source 6 = 1.138701 pixels
[Sat Jun 16 17:29:43 2012] 126.735800 total counts/ 76.950800 bgd. counts: snr = 5.675341
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.138701 pixels
  Position = (244.0, 160.8) = 12 19 35.67 6 30 22.6
  Extent = 9.6 (6.0-15.7)", rotation angle = 0
  Source counts = 49.8 +/- 11.3
  Background counts = 77.0
  Rate = 0.003 +/- 0.0007
[Sat Jun 16 17:29:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:29:43 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 17:29:43 2012] Source does appear to be extended
[Sat Jun 16 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 18:16:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:16:47 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Sat Jun 16 18:16:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.230
[Sat Jun 16 18:16:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.59"
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 18:31:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 18:31:28 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 16 18:31:36 2012] Spatial fit model total counts = 125.759000, observed total counts = 124.000000
[Sat Jun 16 18:31:36 2012] Offset between fit and detection position for source 6 = 0.389049 pixels
[Sat Jun 16 18:31:36 2012] 129.222400 total counts/ 88.244100 bgd. counts: snr = 4.362255
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.389049 pixels
  Position = (243.7, 160.7) = 12 19 35.78 6 30 22.1
  Extent = 8.3 (4.9-12.5)", rotation angle = 0
  Source counts = 41.0 +/- 11.4
  Background counts = 88.2
  Rate = 0.002 +/- 0.0007
[Sat Jun 16 18:31:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:31:36 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 18:31:36 2012] Source does appear to be extended
[Sat Jun 16 18:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 19:21:19 2012] XMMSAS src. selection expression = ellipse(21150.778000, 13931.807800, 500.888414, 500.888414, 0.000000, X, Y)
[Sat Jun 16 19:21:19 2012] Writing source region out to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 16 19:21:19 2012] Extracting stamp from image fullrun_mos2_xmm0111291101_pi300-10000_cl_sm2.00.img.gz, (215, 132) - (272, 189)
[Sat Jun 16 19:21:19 2012] XMMSAS bgd. selection expression = annulus(21150.778000, 13931.807800, 834.814024, 1669.628048, X, Y)
[Sat Jun 16 19:21:19 2012] Writing fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 16 19:22:28 2012] Mean detx,y = (-8037.30, 7367.86) 
[Sat Jun 16 19:22:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 19:22:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 19:22:40 2012] Setting source spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 19:22:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 16 19:35:10 2012] Not generating rmf since there are only 40 counts
[Sat Jun 16 19:35:10 2012] rmf not generated due to insufficient counts
[Sat Jun 16 19:36:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 19:36:14 2012] Error reading totcts from fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 16 19:36:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 19:36:14 2012] Using photon index=1.80, rate=0.00245, arf fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src6.arf
[Sat Jun 16 19:36:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 19:36:14 2012] Updating source flux to 4.7e-14
[Sat Jun 16 19:36:44 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting