[Sat Jun 16 16:11:48 2012] Detection parameters:
  Position = (300.7, 285.8) = 12 19 19.13 6 39 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.1 +/- 21.1
  Background counts = 11.8
  Rate = 0.02 +/- 0.001

[Sat Jun 16 16:11:48 2012] Off-axis axis estimate = 0.93'
[Sat Jun 16 17:13:54 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:13:54 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Sat Jun 16 17:13:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Sat Jun 16 17:13:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.89"
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 16 17:29:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 16 17:29:33 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 16 17:29:43 2012] Spatial fit model total counts = 575.070000, observed total counts = 574.000000
[Sat Jun 16 17:29:43 2012] Offset between fit and detection position for source 3 = 0.121747 pixels
[Sat Jun 16 17:29:43 2012] 553.672000 total counts/ 396.945000 bgd. counts: snr = 7.866448
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.121747 pixels
  Position = (300.7, 285.7) = 12 19 19.14 6 39 25.9
  Extent = 4.3 (3.8-4.9)", rotation angle = 0
  Source counts = 156.7 +/- 23.5
  Background counts = 396.9
  Rate = 0.009 +/- 0.001
[Sat Jun 16 17:29:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:29:43 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 17:29:43 2012] Source does appear to be extended
[Sat Jun 16 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 18:16:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:16:47 2012] Initial guess for spatial extent in simple fitting = 4.30"
[Sat Jun 16 18:16:47 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.015
[Sat Jun 16 18:16:47 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.30"
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3.csv
[Sat Jun 16 18:31:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 16 18:31:28 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 16 18:31:36 2012] Spatial fit model total counts = 664.800000, observed total counts = 665.000000
[Sat Jun 16 18:31:36 2012] Offset between fit and detection position for source 3 = 0.010232 pixels
[Sat Jun 16 18:31:36 2012] 632.945000 total counts/ 480.974000 bgd. counts: snr = 6.929468
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010232 pixels
  Position = (300.7, 285.7) = 12 19 19.13 6 39 25.9
  Extent = 4.2 (3.7-4.7)", rotation angle = 0
  Source counts = 152.0 +/- 25.2
  Background counts = 481.0
  Rate = 0.009 +/- 0.002
[Sat Jun 16 18:31:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:31:36 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 18:31:36 2012] Source does appear to be extended
[Sat Jun 16 18:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 19:21:18 2012] XMMSAS src. selection expression = ellipse(26110.846000, 24807.787600, 252.298807, 252.298807, 0.000000, X, Y)
[Sat Jun 16 19:21:18 2012] Writing source region out to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 16 19:21:18 2012] Extracting stamp from image fullrun_mos2_xmm0111291101_pi300-10000_cl_sm2.00.img.gz, (286, 271) - (315, 300)
[Sat Jun 16 19:21:19 2012] XMMSAS bgd. selection expression = annulus(26110.846000, 24807.787600, 420.498012, 840.996024, X, Y) && !ellipse(25550.978600, 23847.024400, 416.964012, 416.964012, 0.000000, X, Y)
[Sat Jun 16 19:21:19 2012] Writing fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3.gif
[Sat Jun 16 19:22:10 2012] Mean detx,y = (915.36, -537.10) 
[Sat Jun 16 19:22:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 19:22:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 19:22:17 2012] Setting source spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 19:22:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 16 19:36:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 19:36:14 2012] Error reading totcts from fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 19:36:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 19:36:14 2012] Using photon index=1.80, rate=0.0091, arf fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 19:36:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 19:36:14 2012] Updating source flux to 1.3e-13