[Sat Jun 16 16:11:48 2012] Detection parameters:
  Position = (120.5, 248.3) = 12 20 11.74 6 36 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.7 +/- 9.2
  Background counts = 7.0
  Rate = 0.003 +/- 0.0005

[Sat Jun 16 16:11:48 2012] Off-axis axis estimate = 13.40'
[Sat Jun 16 17:13:54 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:13:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 17:13:54 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Sat Jun 16 17:13:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Sat Jun 16 17:13:54 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.13"
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 16 17:29:32 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 16 17:29:33 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jun 16 17:29:43 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.669491 pixels away
[Sat Jun 16 17:29:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:29:43 2012] Assessing source extent using major
[Sat Jun 16 17:29:43 2012] Source does appear to be extended
[Sat Jun 16 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 18:16:47 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:16:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 18:16:47 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Sat Jun 16 18:16:47 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Sat Jun 16 18:16:47 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.13"
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 16 18:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 16 18:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 16 18:31:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 16 18:31:28 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 16 18:31:36 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.068954 pixels away
[Sat Jun 16 18:31:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:31:36 2012] Assessing source extent using major
[Sat Jun 16 18:31:36 2012] Source does appear to be extended
[Sat Jun 16 18:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 19:21:19 2012] XMMSAS src. selection expression = ellipse(10434.932297, 21556.457077, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 16 19:21:19 2012] Writing source region out to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 16 19:21:19 2012] Extracting stamp from image fullrun_mos2_xmm0111291101_pi300-10000_cl_sm2.00.img.gz, (83, 211) - (158, 286)
[Sat Jun 16 19:21:19 2012] XMMSAS bgd. selection expression = annulus(10434.932297, 21556.457077, 1087.500000, 2175.000000, X, Y)
[Sat Jun 16 19:21:19 2012] Writing fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12.gif
[Sat Jun 16 19:23:38 2012] Mean detx,y = (-14732.46, -3958.32) 
[Sat Jun 16 19:23:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 19:23:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 19:23:51 2012] Setting source spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 16 19:23:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 16 19:35:36 2012] Not generating rmf since there are only 47 counts
[Sat Jun 16 19:35:36 2012] rmf not generated due to insufficient counts
[Sat Jun 16 19:36:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 19:36:14 2012] Error reading totcts from fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 16 19:36:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 19:36:14 2012] Using photon index=1.80, rate=0.00286, arf fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src12.arf
[Sat Jun 16 19:36:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 19:36:14 2012] Updating source flux to 6.4e-14
[Sat Jun 16 19:36:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting