[Sat Jun 16 16:11:48 2012] Detection parameters:
  Position = (213.6, 255.8) = 12 19 44.54 6 37 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.1 +/- 17.9
  Background counts = 10.1
  Rate = 0.02 +/- 0.001

[Sat Jun 16 16:11:48 2012] Off-axis axis estimate = 6.88'
[Sat Jun 16 17:13:54 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:13:54 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Sat Jun 16 17:13:54 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Sat Jun 16 17:13:54 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.87"
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 16 17:29:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 16 17:29:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:29:32 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 16 17:29:33 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 16 17:29:33 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun 16 17:29:43 2012] Spatial fit model total counts = 286.672000, observed total counts = 267.000000
[Sat Jun 16 17:29:43 2012] Offset between fit and detection position for source 1 = 0.202990 pixels
[Sat Jun 16 17:29:43 2012] 287.602000 total counts/ 128.200000 bgd. counts: snr = 14.078285
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.202990 pixels
  Position = (213.6, 255.6) = 12 19 44.55 6 37 15.1
  Extent = 6.2 (5.6-7.1)", rotation angle = 0
  Source counts = 159.4 +/- 17.0
  Background counts = 128.2
  Rate = 0.01 +/- 0.001
[Sat Jun 16 17:29:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:29:43 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 17:29:43 2012] Source does appear to be extended
[Sat Jun 16 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 18:16:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:16:47 2012] Initial guess for spatial extent in simple fitting = 6.22"
[Sat Jun 16 18:16:47 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.073
[Sat Jun 16 18:16:47 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.22"
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 18:31:27 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 16 18:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 18:31:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 16 18:31:28 2012] fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 16 18:31:28 2012] Fit fullrun_mos2_xmm0111291101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 16 18:31:36 2012] Spatial fit model total counts = 290.925000, observed total counts = 274.000000
[Sat Jun 16 18:31:36 2012] Offset between fit and detection position for source 1 = 0.009718 pixels
[Sat Jun 16 18:31:36 2012] 291.482000 total counts/ 133.838000 bgd. counts: snr = 13.626607
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009718 pixels
  Position = (213.6, 255.6) = 12 19 44.55 6 37 15.1
  Extent = 6.2 (5.5-7.1)", rotation angle = 0
  Source counts = 157.6 +/- 17.1
  Background counts = 133.8
  Rate = 0.009 +/- 0.001
[Sat Jun 16 18:31:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:31:36 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 18:31:36 2012] Source does appear to be extended
[Sat Jun 16 18:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 19:21:18 2012] XMMSAS src. selection expression = ellipse(18536.442800, 22192.466800, 370.116011, 370.116011, 0.000000, X, Y)
[Sat Jun 16 19:21:18 2012] Writing source region out to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 19:21:18 2012] Extracting stamp from image fullrun_mos2_xmm0111291101_pi300-10000_cl_sm2.00.img.gz, (192, 234) - (235, 277)
[Sat Jun 16 19:21:18 2012] XMMSAS bgd. selection expression = annulus(18536.442800, 22192.466800, 616.860018, 1233.720035, X, Y)
[Sat Jun 16 19:21:18 2012] Writing fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 19:21:58 2012] Mean detx,y = (-7071.07, -1233.07) 
[Sat Jun 16 19:21:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 19:22:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 19:22:08 2012] Setting source spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 19:22:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 19:36:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 19:36:14 2012] Error reading totcts from fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 19:36:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 19:36:14 2012] Using photon index=1.80, rate=0.00944, arf fullrun_mos2_xmm0111291101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 19:36:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 19:36:14 2012] Updating source flux to 1.3e-13