[Sat Jun 16 16:11:29 2012] Detection parameters:
  Position = (335.7, 262.5) = 12 19 8.91 6 37 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 7.7
  Background counts = 11.1
  Rate = 0.002 +/- 0.0006

[Sat Jun 16 16:11:29 2012] Off-axis axis estimate = 3.75'
[Sat Jun 16 16:42:46 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 16:42:46 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Sat Jun 16 16:42:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Sat Jun 16 16:42:46 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.30"
[Sat Jun 16 17:13:54 2012] fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 16 17:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13.csv
[Sat Jun 16 17:13:54 2012] fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 16 17:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13.csv
[Sat Jun 16 17:13:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:13:54 2012] fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 16 17:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 16 17:13:54 2012] fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 16 17:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 16 17:13:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111291101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:29:41 2012] Spatial fit model total counts = 33.887500, observed total counts = 94.000000
[Sat Jun 16 17:29:41 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 16 17:29:41 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:29:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:29:41 2012] Assessing source extent using major
[Sat Jun 16 17:29:41 2012] Source does appear to be extended
[Sat Jun 16 17:29:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 17:29:41 2012] Deleting source due to low Poisson probability 1.0