[Wed May 16 11:23:26 2012] Detection parameters:
  Position = (404.4, 265.0) = 14 27 3.46 26 28 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.7 +/- 24.0
  Background counts = 144.2
  Rate = 0.007 +/- 0.0008

[Wed May 16 11:23:27 2012] Off-axis axis estimate = 8.05'
[Wed May 16 11:31:44 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Wed May 16 11:31:44 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Wed May 16 11:31:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Wed May 16 11:31:44 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.46"
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22.ximg exists
[Wed May 16 12:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22.csv
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May 16 12:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22.csv
[Wed May 16 12:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May 16 12:56:22 2012] Fit fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed May 16 14:39:39 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.603767 pixels away
[Wed May 16 14:39:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:39 2012] Assessing source extent using major
[Wed May 16 14:39:39 2012] Source does appear to be extended
[Wed May 16 14:39:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 14:40:07 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Wed May 16 14:40:07 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Wed May 16 14:40:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Wed May 16 14:40:07 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.46"
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22.ximg exists
[Wed May 16 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22.csv
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May 16 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22.csv
[Wed May 16 16:08:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May 16 16:08:34 2012] Fit fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Wed May 16 17:40:28 2012] Spatial fit model total counts = 766.085000, observed total counts = 724.000000
[Wed May 16 17:40:28 2012] Offset between fit and detection position for source 23 = 0.156991 pixels
[Wed May 16 17:40:28 2012] 769.358300 total counts/ 673.292000 bgd. counts: snr = 3.702281
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.156991 pixels
  Position = (404.4, 265.1) = 14 27 3.45 26 28 12.3
  Extent = 4.8 (3.9-5.9)", rotation angle = 0
  Source counts = 96.1 +/- 27.7
  Background counts = 673.3
  Rate = 0.003 +/- 0.0009
[Wed May 16 17:40:28 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:28 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:28 2012] Source does appear to be extended
[Wed May 16 17:40:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 17:40:57 2012] XMMSAS src. selection expression = ellipse(35134.657000, 23016.445000, 290.605208, 290.605208, 0.000000, X, Y)
[Wed May 16 17:40:57 2012] Writing source region out to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23_src.reg
[Wed May 16 17:40:57 2012] Extracting stamp from image fullrun_pn_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (388, 248) - (421, 282)
[Wed May 16 17:40:57 2012] XMMSAS bgd. selection expression = annulus(35134.657000, 23016.445000, 484.342014, 968.684028, X, Y)
[Wed May 16 17:40:57 2012] Writing fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23.gif
[Wed May 16 18:15:29 2012] Mean detx,y = (6879.34, 6993.41) 
[Wed May 16 18:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 18:16:00 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 18:16:01 2012] Setting source spectrum file to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 16 18:16:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 16 19:54:18 2012] Not generating rmf since there are only 96 counts
[Wed May 16 19:54:18 2012] rmf not generated due to insufficient counts
[Wed May 16 21:40:23 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:24 2012] Error reading totcts from fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 16 21:40:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:27 2012] Using photon index=1.80, rate=0.00298, arf fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src23.arf
[Wed May 16 21:40:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:27 2012] Updating source flux to 1.5e-14
[Wed May 16 21:42:34 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting