[Wed May 16 11:23:24 2012] Detection parameters:
  Position = (230.2, 177.0) = 14 27 59.86 26 21 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1909.9 +/- 56.6
  Background counts = 141.6
  Rate = 0.04 +/- 0.001

[Wed May 16 11:23:27 2012] Off-axis axis estimate = 10.10'
[Wed May 16 11:31:44 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Wed May 16 11:31:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 11:31:44 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Wed May 16 11:31:44 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Wed May 16 11:31:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.48"
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 16 12:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1.csv
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 16 12:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1.csv
[Wed May 16 12:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 16 12:56:22 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 16 12:56:22 2012] Fit fullrun_pn_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 16 14:39:39 2012] Spatial fit model total counts = 2086.000000, observed total counts = 2086.000000
[Wed May 16 14:39:39 2012] Offset between fit and detection position for source 1 = 0.155707 pixels
[Wed May 16 14:39:39 2012] 2081.944000 total counts/ 974.534000 bgd. counts: snr = 35.473982
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.155707 pixels
  Position = (230.4, 177.0) = 14 27 59.81 26 21 49.0
  Extent = 7.0 (6.5-7.3)", rotation angle = 0
  Source counts = 1107.4 +/- 45.6
  Background counts = 974.5
  Rate = 0.03 +/- 0.001
[Wed May 16 14:39:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:39 2012] Assessing source extent using major axis lower bound
[Wed May 16 14:39:39 2012] Source does appear to be extended
[Wed May 16 14:39:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 14:40:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 14:40:07 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Wed May 16 14:40:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Wed May 16 14:40:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.97"
[Wed May 16 16:08:33 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 16 16:08:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1.csv
[Wed May 16 16:08:33 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 16 16:08:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1.csv
[Wed May 16 16:08:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 16 16:08:34 2012] fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 16 16:08:34 2012] Fit fullrun_pn_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 16 17:40:28 2012] Spatial fit model total counts = 1737.370000, observed total counts = 1733.000000
[Wed May 16 17:40:28 2012] Offset between fit and detection position for source 1 = 0.026544 pixels
[Wed May 16 17:40:28 2012] 1742.126000 total counts/ 690.006000 bgd. counts: snr = 40.053350
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.026544 pixels
  Position = (230.4, 176.9) = 14 27 59.82 26 21 48.9
  Extent = 6.5 (6.2-7.0)", rotation angle = 0
  Source counts = 1052.1 +/- 41.7
  Background counts = 690.0
  Rate = 0.03 +/- 0.001
[Wed May 16 17:40:28 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:28 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:28 2012] Source does appear to be extended
[Wed May 16 17:40:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 17:40:57 2012] Counts = 1052.120000, rescaling region sizes by 2.000000
[Wed May 16 17:40:57 2012] XMMSAS src. selection expression = ellipse(19992.415400, 15345.808600, 784.905623, 784.905623, 0.000000, X, Y)
[Wed May 16 17:40:57 2012] Writing source region out to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_src.reg
[Wed May 16 17:40:57 2012] Extracting stamp from image fullrun_pn_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (185, 132) - (275, 222)
[Wed May 16 17:40:57 2012] XMMSAS bgd. selection expression = annulus(19992.415400, 15345.808600, 2616.352075, 5232.704151, X, Y) && !ellipse(19024.272003, 14398.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22567.861380, 20503.848000, 620.874418, 620.874418, 0.000000, X, Y) && !ellipse(25653.354154, 14782.509401, 845.073940, 321.927207, 348.181478, X, Y) && !ellipse(23242.407800, 19519.826580, 551.373616, 352.116010, 359.827646, X, Y) && !ellipse(16044.394562, 17967.729645, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 17:40:57 2012] Writing fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1.gif
[Wed May 16 17:41:23 2012] Mean detx,y = (-9857.12, 9805.86) 
[Wed May 16 17:41:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 17:44:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 17:44:25 2012] Setting source spectrum file to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 17:44:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 21:40:22 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:22 2012] Error reading totcts from fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 21:40:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:25 2012] Using photon index=1.80, rate=0.0326, arf fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:40:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:25 2012] Updating source flux to 2.2e-13
[Wed May 16 21:45:17 2012] Reading fit data from xmm0111290601/analysis//spectral/fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 16 21:45:17 2012] Spectral fit parameter nH value = 4.40255e+19
[Wed May 16 21:45:17 2012] Spectral fit parameter PhoIndex value = 1.979
[Wed May 16 21:45:17 2012] Failed to get F(0.3-8.0) from xmm0111290601/analysis//spectral/fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 16 21:45:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:45:17 2012] Using Nh = 4.4e+19, photon index=1.98, rate=0.0326, arf fullrun_pn_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:45:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:45:17 2012] Updating source flux to 1.9e-13