[Wed May 16 11:24:56 2012] Detection parameters:
  Position = (274.5, 405.5) = 14 27 45.53 26 38 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.3 +/- 20.0
  Background counts = 76.1
  Rate = 0.006 +/- 0.0007

[Wed May 16 11:24:57 2012] Off-axis axis estimate = 7.95'
[Wed May 16 13:33:18 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed May 16 13:33:18 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Wed May 16 13:33:18 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.658
[Wed May 16 13:33:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.41"
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:51 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.528793 pixels away
[Wed May 16 14:39:51 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:51 2012] Assessing source extent using major
[Wed May 16 14:39:51 2012] Source does appear to be extended
[Wed May 16 14:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:43:34 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:43:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 16:43:34 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Wed May 16 16:43:34 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.658
[Wed May 16 16:43:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.41"
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5.csv
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5.csv
[Wed May 16 17:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 16 17:40:17 2012] Fit fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 16 17:40:41 2012] Spatial fit model total counts = 266.130000, observed total counts = 250.000000
[Wed May 16 17:40:41 2012] Offset between fit and detection position for source 9 = 0.397457 pixels
[Wed May 16 17:40:41 2012] 262.596600 total counts/ 184.984000 bgd. counts: snr = 5.706439
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.397457 pixels
  Position = (274.2, 405.4) = 14 27 45.65 26 38 22.6
  Extent = 5.2 (2.6-7.0)", rotation angle = 0
  Source counts = 77.6 +/- 16.2
  Background counts = 185.0
  Rate = 0.002 +/- 0.0004
[Wed May 16 17:40:41 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:41 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:41 2012] Source does appear to be extended
[Wed May 16 17:40:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:55:38 2012] XMMSAS src. selection expression = ellipse(23804.124500, 35217.831200, 312.240009, 312.240009, 0.000000, X, Y)
[Wed May 16 20:55:38 2012] Writing source region out to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9_src.reg
[Wed May 16 20:55:38 2012] Extracting stamp from image fullrun_mos2_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (256, 387) - (292, 423)
[Wed May 16 20:55:38 2012] XMMSAS bgd. selection expression = annulus(23804.124500, 35217.831200, 520.400015, 1040.800030, X, Y)
[Wed May 16 20:55:38 2012] Writing fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9.gif
[Wed May 16 20:57:35 2012] Mean detx,y = (514.60, 7886.39) 
[Wed May 16 20:57:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:57:57 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:57:57 2012] Setting source spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 16 20:57:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 16 21:33:22 2012] Not generating rmf since there are only 77 counts
[Wed May 16 21:33:23 2012] rmf not generated due to insufficient counts
[Wed May 16 21:40:31 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:31 2012] Error reading totcts from fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 16 21:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:32 2012] Using photon index=1.80, rate=0.002, arf fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src9.arf
[Wed May 16 21:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:32 2012] Updating source flux to 4.7e-14
[Wed May 16 21:41:46 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting