[Wed May 16 11:24:56 2012] Detection parameters:
  Position = (414.2, 470.8) = 14 27 0.19 26 43 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.2 +/- 17.4
  Background counts = 70.2
  Rate = 0.002 +/- 0.0003

[Wed May 16 11:24:57 2012] Off-axis axis estimate = 15.05'
[Wed May 16 13:33:18 2012] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Wed May 16 13:33:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 13:33:18 2012] Initial guess for spatial extent in simple fitting = 13.96"
[Wed May 16 13:33:18 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.018
[Wed May 16 13:33:18 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.96"
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 16 14:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:51 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 18.377176 pixels away
[Wed May 16 14:39:51 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:51 2012] Assessing source extent using major
[Wed May 16 14:39:51 2012] Source does appear to be extended
[Wed May 16 14:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:43:34 2012] Using EEF radius (= 13.96 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:43:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 16:43:34 2012] Initial guess for spatial extent in simple fitting = 13.96"
[Wed May 16 16:43:34 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.018
[Wed May 16 16:43:34 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.96"
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19.csv
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19.csv
[Wed May 16 17:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 16 17:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:40:41 2012] Spatial fit model total counts = 276.179000, observed total counts = 225.000000
[Wed May 16 17:40:41 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 16 17:40:41 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:41 2012] Assessing source extent using major
[Wed May 16 17:40:41 2012] Source does appear to be extended
[Wed May 16 17:40:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:55:38 2012] XMMSAS src. selection expression = ellipse(35988.382568, 40910.432526, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 16 20:55:38 2012] Writing source region out to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6_src.reg
[Wed May 16 20:55:38 2012] Extracting stamp from image fullrun_mos2_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (377, 433) - (452, 508)
[Wed May 16 20:55:38 2012] XMMSAS bgd. selection expression = annulus(35988.382568, 40910.432526, 1087.500000, 2175.000000, X, Y)
[Wed May 16 20:55:38 2012] Writing fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6.gif
[Wed May 16 21:06:11 2012] Mean detx,y = (-12710.46, 9813.53) 
[Wed May 16 21:06:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 21:06:46 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 21:06:47 2012] Setting source spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 16 21:06:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 16 21:36:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 16 21:36:49 2012] rmf not generated due to insufficient counts
[Wed May 16 21:40:32 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:32 2012] Error reading totcts from fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 16 21:40:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:33 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src6.arf
[Wed May 16 21:40:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:33 2012] Updating source flux to 5.8e-14
[Wed May 16 21:41:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting