[Wed May 16 11:24:56 2012] Detection parameters:
  Position = (230.6, 177.3) = 14 27 59.74 26 21 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 843.2 +/- 37.0
  Background counts = 78.2
  Rate = 0.02 +/- 0.0007

[Wed May 16 11:24:57 2012] Off-axis axis estimate = 10.07'
[Wed May 16 13:33:18 2012] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Wed May 16 13:33:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 13:33:18 2012] Initial guess for spatial extent in simple fitting = 11.46"
[Wed May 16 13:33:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.068
[Wed May 16 13:33:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.46"
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 16 14:39:29 2012] Fit fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 16 14:39:29 2012] Fit fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 16 14:39:51 2012] Spatial fit model total counts = 766.017000, observed total counts = 753.000000
[Wed May 16 14:39:51 2012] Offset between fit and detection position for source 2 = 0.171787 pixels
[Wed May 16 14:39:51 2012] 761.718000 total counts/ 270.849000 bgd. counts: snr = 29.826479
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.171787 pixels
  Position = (230.6, 177.5) = 14 27 59.72 26 21 51.1
  Extent = 8.0" x 4.1", rotation angle = 26
  Source counts = 490.9 +/- 27.6
  Background counts = 270.8
  Rate = 0.01 +/- 0.0007
[Wed May 16 14:39:51 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:51 2012] Assessing source extent using major
[Wed May 16 14:39:51 2012] Source does appear to be extended
[Wed May 16 14:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.96
[Wed May 16 14:39:51 2012] Source is asymmetric
[Wed May 16 16:43:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 16:43:34 2012] Initial guess for spatial extent in simple fitting = 6.07"
[Wed May 16 16:43:34 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.835
[Wed May 16 16:43:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.07"
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3.csv
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3.csv
[Wed May 16 17:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 16 17:40:17 2012] Fit fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 16 17:40:41 2012] Spatial fit model total counts = 760.509000, observed total counts = 753.000000
[Wed May 16 17:40:41 2012] Offset between fit and detection position for source 2 = 0.022799 pixels
[Wed May 16 17:40:41 2012] 756.836000 total counts/ 290.434000 bgd. counts: snr = 27.367598
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.022799 pixels
  Position = (230.6, 177.5) = 14 27 59.72 26 21 51.2
  Extent = 5.7 (5.2-6.2)", rotation angle = 0
  Source counts = 466.4 +/- 27.5
  Background counts = 290.4
  Rate = 0.01 +/- 0.0007
[Wed May 16 17:40:41 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:41 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:41 2012] Source does appear to be extended
[Wed May 16 17:40:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:55:38 2012] XMMSAS src. selection expression = ellipse(20016.984800, 15392.057200, 339.214810, 339.214810, 0.000000, X, Y)
[Wed May 16 20:55:38 2012] Writing source region out to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2_src.reg
[Wed May 16 20:55:38 2012] Extracting stamp from image fullrun_mos2_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (211, 158) - (250, 197)
[Wed May 16 20:55:38 2012] XMMSAS bgd. selection expression = annulus(20016.984800, 15392.057200, 565.358016, 1130.716033, X, Y)
[Wed May 16 20:55:38 2012] Writing fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2.gif
[Wed May 16 20:56:50 2012] Mean detx,y = (9880.57, -9998.33) 
[Wed May 16 20:56:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:57:08 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:57:08 2012] Setting source spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 16 20:57:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 16 21:40:31 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:31 2012] Error reading totcts from fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 16 21:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:32 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src2.arf
[Wed May 16 21:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:32 2012] Updating source flux to 4.2e-13