[Wed May 16 11:24:56 2012] Detection parameters:
  Position = (305.0, 320.8) = 14 27 35.66 26 32 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10548.5 +/- 121.9
  Background counts = 110.1
  Rate = 0.2 +/- 0.002

[Wed May 16 11:24:57 2012] Off-axis axis estimate = 1.69'
[Wed May 16 13:33:18 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed May 16 13:33:18 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed May 16 13:33:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed May 16 13:33:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 16 14:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 16 14:39:29 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 16 14:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 16 14:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 14:39:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.835426 pixels away
[Wed May 16 14:39:51 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:51 2012] Assessing source extent using major
[Wed May 16 14:39:51 2012] Source does appear to be extended
[Wed May 16 14:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:43:34 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:43:34 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed May 16 16:43:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed May 16 16:43:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 16 17:40:17 2012] Fit fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 16 17:40:17 2012] fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 16 17:40:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 16 17:40:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:40:41 2012] Spatial fit model total counts = 7767.220000, observed total counts = 7382.000000
[Wed May 16 17:40:41 2012] Offset between fit and detection position for source 1 = 0.271581 pixels
[Wed May 16 17:40:41 2012] 7777.420000 total counts/ 1999.350000 bgd. counts: snr = 129.222573
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.271581 pixels
  Position = (304.8, 320.6) = 14 27 35.73 26 32 14.0
  Extent = 5.7" x 5.1", rotation angle = 342
  Source counts = 5778.1 +/- 88.2
  Background counts = 1999.3
  Rate = 0.1 +/- 0.002
[Wed May 16 17:40:41 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:41 2012] Assessing source extent using major
[Wed May 16 17:40:41 2012] Source does appear to be extended
[Wed May 16 17:40:41 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Wed May 16 20:55:38 2012] Counts = 5778.070000, rescaling region sizes by 2.000000
[Wed May 16 20:55:38 2012] XMMSAS src. selection expression = ellipse(26465.168333, 27845.148833, 681.545245, 607.374049, 342.048266, X, Y)
[Wed May 16 20:55:38 2012] Writing source region out to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_src.reg
[Wed May 16 20:55:38 2012] Extracting stamp from image fullrun_mos2_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (266, 281) - (344, 360)
[Wed May 16 20:55:38 2012] XMMSAS bgd. selection expression = annulus(26465.168333, 27845.148833, 2271.817485, 4543.634970, X, Y) && !ellipse(29769.379400, 23200.085200, 450.472813, 394.175211, 330.342567, X, Y) && !ellipse(27936.570600, 26047.682600, 372.846411, 372.846411, 0.000000, X, Y) && !ellipse(28741.772320, 30282.839800, 424.517612, 424.517612, 0.000000, X, Y) && !ellipse(29929.261800, 32155.918400, 434.223212, 434.223212, 0.000000, X, Y) && !ellipse(25713.405020, 23304.817800, 307.625609, 307.625609, 0.000000, X, Y)
[Wed May 16 20:55:38 2012] Writing fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1.gif
[Wed May 16 20:55:43 2012] Mean detx,y = (108.48, 56.75) 
[Wed May 16 20:55:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:56:17 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:56:18 2012] Setting source spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 20:56:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 21:40:30 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:30 2012] Error reading totcts from fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 21:40:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:32 2012] Using photon index=1.80, rate=0.149, arf fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:40:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:32 2012] Updating source flux to 1.6e-12
[Wed May 16 21:42:34 2012] Reading fit data from xmm0111290601/analysis//spectral/fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 16 21:42:34 2012] Spectral fit parameter nH value = 381223000000.0
[Wed May 16 21:42:34 2012] Spectral fit parameter PhoIndex value = 1.46927
[Wed May 16 21:42:34 2012] Failed to get F(0.3-8.0) from xmm0111290601/analysis//spectral/fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 16 21:42:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:42:34 2012] Using Nh = 3.8e+11, photon index=1.47, rate=0.149, arf fullrun_mos2_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:42:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:42:34 2012] Updating source flux to 1.9e-12