[Wed May 16 11:24:10 2012] Detection parameters:
  Position = (342.8, 267.2) = 14 27 23.41 26 28 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 798.6 +/- 37.0
  Background counts = 96.4
  Rate = 0.02 +/- 0.0009

[Wed May 16 11:24:11 2012] Off-axis axis estimate = 3.93'
[Wed May 16 12:56:22 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed May 16 12:56:22 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Wed May 16 12:56:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Wed May 16 12:56:22 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.40"
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 16 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2.csv
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 16 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2.csv
[Wed May 16 13:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 16 13:33:18 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 16 14:39:44 2012] Spatial fit model total counts = 703.290000, observed total counts = 700.000000
[Wed May 16 14:39:44 2012] Offset between fit and detection position for source 17 = 0.123518 pixels
[Wed May 16 14:39:44 2012] 709.667000 total counts/ 291.198000 bgd. counts: snr = 24.522746
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.123518 pixels
  Position = (342.8, 267.3) = 14 27 23.40 26 28 21.9
  Extent = 5.1 (4.7-5.6)", rotation angle = 0
  Source counts = 418.5 +/- 26.6
  Background counts = 291.2
  Rate = 0.01 +/- 0.0007
[Wed May 16 14:39:44 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:44 2012] Assessing source extent using major axis lower bound
[Wed May 16 14:39:44 2012] Source does appear to be extended
[Wed May 16 14:39:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:08:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 16:08:34 2012] Initial guess for spatial extent in simple fitting = 5.15"
[Wed May 16 16:08:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.059
[Wed May 16 16:08:34 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.15"
[Wed May 16 16:43:33 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 16 16:43:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2.csv
[Wed May 16 16:43:33 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 16 16:43:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2.csv
[Wed May 16 16:43:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 16:43:34 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 16 16:43:34 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 16 16:43:34 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 16 17:40:34 2012] Spatial fit model total counts = 711.695000, observed total counts = 709.000000
[Wed May 16 17:40:34 2012] Offset between fit and detection position for source 17 = 0.012152 pixels
[Wed May 16 17:40:34 2012] 715.667000 total counts/ 294.266000 bgd. counts: snr = 24.565495
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.012152 pixels
  Position = (342.8, 267.3) = 14 27 23.40 26 28 21.9
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source counts = 421.4 +/- 26.8
  Background counts = 294.3
  Rate = 0.01 +/- 0.0007
[Wed May 16 17:40:34 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:34 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:34 2012] Source does appear to be extended
[Wed May 16 17:40:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:18:42 2012] XMMSAS src. selection expression = ellipse(29778.046200, 23205.186000, 311.605209, 311.605209, 0.000000, X, Y)
[Wed May 16 20:18:43 2012] Writing source region out to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17_src.reg
[Wed May 16 20:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (325, 249) - (361, 285)
[Wed May 16 20:18:43 2012] XMMSAS bgd. selection expression = annulus(29778.046200, 23205.186000, 519.342015, 1038.684030, X, Y)
[Wed May 16 20:18:43 2012] Writing fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17.gif
[Wed May 16 20:19:28 2012] Mean detx,y = (-5133.89, 1530.04) 
[Wed May 16 20:19:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:19:45 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:19:45 2012] Setting source spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 16 20:19:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May 16 21:40:28 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:28 2012] Error reading totcts from fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 16 21:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:29 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src17.arf
[Wed May 16 21:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:29 2012] Updating source flux to 1.5e-13