[Wed May 16 11:24:10 2012] Detection parameters:
  Position = (331.1, 349.6) = 14 27 27.19 26 34 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.2 +/- 22.9
  Background counts = 87.1
  Rate = 0.006 +/- 0.0005

[Wed May 16 11:24:11 2012] Off-axis axis estimate = 4.40'
[Wed May 16 12:56:22 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Wed May 16 12:56:22 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Wed May 16 12:56:22 2012] source mask rpix=2.0, npix_max = 24, mask sum = 15, frac = 0.608
[Wed May 16 12:56:22 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.63"
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 16 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7.csv
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 16 13:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7.csv
[Wed May 16 13:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 16 13:33:18 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 16 14:39:44 2012] Spatial fit model total counts = 249.997000, observed total counts = 264.000000
[Wed May 16 14:39:44 2012] Offset between fit and detection position for source 11 = 0.977664 pixels
[Wed May 16 14:39:44 2012] 246.485500 total counts/ 179.457000 bgd. counts: snr = 5.003562
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.977664 pixels
  Position = (330.8, 348.7) = 14 27 27.30 26 34 16.2
  Extent = 5.3 (3.3-7.1)", rotation angle = 0
  Source counts = 67.0 +/- 15.7
  Background counts = 179.5
  Rate = 0.002 +/- 0.0004
[Wed May 16 14:39:44 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:44 2012] Assessing source extent using major axis lower bound
[Wed May 16 14:39:44 2012] Source does appear to be extended
[Wed May 16 14:39:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:08:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 16:08:34 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Wed May 16 16:08:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 4, frac = 0.334
[Wed May 16 16:08:34 2012] Skipping simple spatial due to low active detector fraction
[Wed May 16 17:40:34 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:34 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:34 2012] Source does appear to be extended
[Wed May 16 17:40:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:18:43 2012] XMMSAS src. selection expression = ellipse(28727.099400, 30290.195000, 320.890209, 320.890209, 0.000000, X, Y)
[Wed May 16 20:18:43 2012] Writing source region out to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11_src.reg
[Wed May 16 20:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (312, 330) - (349, 367)
[Wed May 16 20:18:43 2012] XMMSAS bgd. selection expression = annulus(28727.099400, 30290.195000, 534.817015, 1069.634031, X, Y) && !ellipse(29935.619354, 32134.265045, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 20:18:43 2012] Writing fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11.gif
[Wed May 16 20:21:33 2012] Mean detx,y = (1930.55, 2617.91) 
[Wed May 16 20:21:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:21:52 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:21:53 2012] Setting source spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 16 20:21:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 16 20:52:25 2012] Not generating rmf since there are only 67 counts
[Wed May 16 20:52:25 2012] rmf not generated due to insufficient counts
[Wed May 16 21:40:28 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:29 2012] Error reading totcts from fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 16 21:40:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:30 2012] Using photon index=1.80, rate=0.00174, arf fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src11.arf
[Wed May 16 21:40:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:30 2012] Updating source flux to 2.4e-14
[Wed May 16 21:40:35 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting