[Wed May 16 11:24:09 2012] Detection parameters:
  Position = (305.0, 320.8) = 14 27 35.66 26 32 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10823.8 +/- 125.6
  Background counts = 103.0
  Rate = 0.2 +/- 0.002

[Wed May 16 11:24:11 2012] Off-axis axis estimate = 1.69'
[Wed May 16 12:56:22 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed May 16 12:56:22 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed May 16 12:56:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed May 16 12:56:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 16 13:33:18 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 16 13:33:18 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 16 13:33:18 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 16 14:39:44 2012] Spatial fit model total counts = 7270.990000, observed total counts = 7271.000000
[Wed May 16 14:39:44 2012] Offset between fit and detection position for source 1 = 0.200881 pixels
[Wed May 16 14:39:44 2012] 7245.610000 total counts/ 1561.070000 bgd. counts: snr = 143.874603
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200881 pixels
  Position = (304.8, 320.7) = 14 27 35.72 26 32 14.5
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 5684.5 +/- 85.1
  Background counts = 1561.1
  Rate = 0.1 +/- 0.002
[Wed May 16 14:39:44 2012] Vigneting correction estimate = 1.000000
[Wed May 16 14:39:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 14:39:44 2012] Assessing source extent using major axis lower bound
[Wed May 16 14:39:44 2012] Source does appear to be extended
[Wed May 16 14:39:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 16:08:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 16:08:34 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Wed May 16 16:08:34 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.253
[Wed May 16 16:08:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.60"
[Wed May 16 16:43:33 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 16 16:43:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1.csv
[Wed May 16 16:43:33 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 16 16:43:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1.csv
[Wed May 16 16:43:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 16:43:34 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 16 16:43:34 2012] fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 16 16:43:34 2012] Fit fullrun_mos1_xmm0111290601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 16 17:40:34 2012] Spatial fit model total counts = 7314.000000, observed total counts = 7314.000000
[Wed May 16 17:40:34 2012] Offset between fit and detection position for source 1 = 0.019242 pixels
[Wed May 16 17:40:34 2012] 7343.830000 total counts/ 1704.320000 bgd. counts: snr = 136.604750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019242 pixels
  Position = (304.8, 320.7) = 14 27 35.72 26 32 14.5
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 5639.5 +/- 85.7
  Background counts = 1704.3
  Rate = 0.1 +/- 0.002
[Wed May 16 17:40:34 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:40:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:40:34 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:40:34 2012] Source does appear to be extended
[Wed May 16 17:40:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:18:42 2012] Counts = 5639.510000, rescaling region sizes by 2.000000
[Wed May 16 20:18:42 2012] XMMSAS src. selection expression = ellipse(26467.472600, 27855.213600, 664.207219, 664.207219, 0.000000, X, Y)
[Wed May 16 20:18:42 2012] Writing source region out to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_src.reg
[Wed May 16 20:18:42 2012] Extracting stamp from image fullrun_mos1_xmm0111290601_pi300-10000_cl_sm2.00.img.gz, (267, 283) - (343, 359)
[Wed May 16 20:18:42 2012] XMMSAS bgd. selection expression = annulus(26467.472600, 27855.213600, 2214.024064, 4428.048127, X, Y) && !ellipse(29778.046200, 23205.186000, 415.473612, 415.473612, 0.000000, X, Y) && !ellipse(27928.192800, 26061.132800, 439.228783, 439.228783, 0.000000, X, Y) && !ellipse(28727.099400, 30290.195000, 427.853612, 427.853612, 0.000000, X, Y) && !ellipse(29935.619354, 32134.265045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.304600, 23305.662800, 598.944793, 598.944793, 0.000000, X, Y)
[Wed May 16 20:18:42 2012] Writing fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1.gif
[Wed May 16 20:18:49 2012] Mean detx,y = (288.48, -271.13) 
[Wed May 16 20:18:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 20:19:21 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 20:19:21 2012] Setting source spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 20:19:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 16 21:40:28 2012] Updating aperture counts using extracted products
[Wed May 16 21:40:28 2012] Error reading totcts from fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 16 21:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:40:29 2012] Using photon index=1.80, rate=0.146, arf fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:40:29 2012] Updating source flux to 1.4e-12
[Wed May 16 21:41:45 2012] Reading fit data from xmm0111290601/analysis//spectral/fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 16 21:41:45 2012] Spectral fit parameter nH value = 3.35672e+12
[Wed May 16 21:41:45 2012] Spectral fit parameter PhoIndex value = 1.42557
[Wed May 16 21:41:45 2012] Failed to get F(0.3-8.0) from xmm0111290601/analysis//spectral/fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 16 21:41:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 16 21:41:45 2012] Using Nh = 3.4e+12, photon index=1.43, rate=0.146, arf fullrun_mos1_xmm0111290601_pi300-10000_pass1_cl_src1.arf
[Wed May 16 21:41:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 16 21:41:46 2012] Updating source flux to 1.7e-12