[Sun Jun  2 08:09:31 2013] Detection parameters:
  Position = (284.9, 272.7) = 11 19 11.89 21 19 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 12.1
  Background counts = 6.1
  Rate = 0.007 +/- 0.002

[Sun Jun  2 08:09:32 2013] Off-axis axis estimate = 2.11'
[Sun Jun  2 08:09:59 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:09:59 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sun Jun  2 08:09:59 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.761
[Sun Jun  2 08:09:59 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.48"
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7.csv
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7.csv
[Sun Jun  2 08:10:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jun  2 08:10:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:19 2013] Spatial fit model total counts = -425.039000, observed total counts = 1061.000000
[Sun Jun  2 08:10:19 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:10:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:19 2013] Assessing source extent using major
[Sun Jun  2 08:10:19 2013] Source does appear to be extended
[Sun Jun  2 08:10:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:10:31 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:10:31 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sun Jun  2 08:10:31 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.761
[Sun Jun  2 08:10:31 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.48"
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7.csv
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7.csv
[Sun Jun  2 08:10:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun  2 08:10:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:44 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.018338 pixels away
[Sun Jun  2 08:10:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:44 2013] Assessing source extent using major
[Sun Jun  2 08:10:44 2013] Source does appear to be extended
[Sun Jun  2 08:10:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:40:50 2013] XMMSAS src. selection expression = ellipse(24734.454132, 23679.151672, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 08:40:50 2013] Not overwriting source region fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun  2 08:40:50 2013] Extracting stamp from image fullrun_mos2_xmm0111290401_pi300-10000_cl_sm2.00.img.gz, (247, 235) - (322, 310)
[Sun Jun  2 08:40:50 2013] XMMSAS bgd. selection expression = annulus(24734.454132, 23679.151672, 1087.500000, 2175.000000, X, Y) && !ellipse(25619.051060, 23931.074800, 425.909612, 425.909612, 0.000000, X, Y)
[Sun Jun  2 08:40:50 2013] Writing fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9.gif
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/events/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0111290401/products/events/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Jun  2 08:40:50 2013] Mean detx,y = (-540.20, -124.23) 
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/images/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src.img and ../../xmm0111290401/products/images/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/spectra/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0111290401/products/spectra/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Jun  2 08:40:50 2013] Setting source spectrum file to fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun  2 08:40:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/lightcurves/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0111290401/products/lightcurves/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Jun  2 08:40:52 2013] Not generating rmf since there are only 50 counts
[Sun Jun  2 08:40:52 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:40:52 2013] fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Sun Jun  2 08:41:13 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:41:13 2013] Total counts from fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 601.00
[Sun Jun  2 08:41:13 2013] Total counts from fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1476.00
[Sun Jun  2 08:41:13 2013] Got source and background scale factors 1160416.000000, 10617948.000000
[Sun Jun  2 08:41:13 2013] User source parameters:
  Position = (284.9, 272.7) = 11 19 11.89 21 19 7.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 439.7 +/- 25.5
  Background aperture counts = 161.3
  Rate = 0.05 +/- 0.003

[Sun Jun  2 08:41:13 2013] Updating counts from extracted products
[Sun Jun  2 08:41:13 2013] Set source signif. to 439.69/12.70 = 34.62
[Sun Jun  2 08:41:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:41:14 2013] Using photon index=1.80, rate=0.0516, arf fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9.arf
[Sun Jun  2 08:41:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:41:14 2013] Updating source flux to 5.1e-13
[Sun Jun  2 08:41:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 08:41:24 2013] xmm0111290401/analysis//spectral/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete