[Sun Jun  2 08:09:31 2013] Detection parameters:
  Position = (187.5, 220.5) = 11 19 42.19 21 15 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.5 +/- 10.1
  Background counts = 2.6
  Rate = 0.02 +/- 0.002

[Sun Jun  2 08:09:32 2013] Off-axis axis estimate = 9.83'
[Sun Jun  2 08:09:59 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:09:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 08:09:59 2013] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Jun  2 08:09:59 2013] source mask rpix=2.6, npix_max = 38, mask sum = 40, frac = 1.035
[Sun Jun  2 08:09:59 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.34"
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  2 08:10:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 08:10:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  2 08:10:00 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  2 08:10:00 2013] Fit fullrun_mos2_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun  2 08:10:19 2013] Spatial fit model total counts = 83.510100, observed total counts = 81.000000
[Sun Jun  2 08:10:19 2013] Offset between fit and detection position for source 2 = 0.084474 pixels
[Sun Jun  2 08:10:19 2013] 86.004700 total counts/ 27.802700 bgd. counts: snr = 11.038102
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.084474 pixels
  Position = (187.5, 220.6) = 11 19 42.20 21 15 18.5
  Extent = 6.2 (4.7-7.6)", rotation angle = 0
  Source counts = 58.2 +/- 9.3
  Background counts = 27.8
  Rate = 0.007 +/- 0.001
[Sun Jun  2 08:10:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:19 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:10:19 2013] Source does appear to be extended
[Sun Jun  2 08:10:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:10:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:10:31 2013] Initial guess for spatial extent in simple fitting = 6.20"
[Sun Jun  2 08:10:31 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.809
[Sun Jun  2 08:10:31 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.20"
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  2 08:10:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 08:10:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  2 08:10:32 2013] fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  2 08:10:32 2013] Fit fullrun_mos2_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun  2 08:10:44 2013] Spatial fit model total counts = 83.754300, observed total counts = 81.000000
[Sun Jun  2 08:10:44 2013] Offset between fit and detection position for source 2 = 0.017318 pixels
[Sun Jun  2 08:10:44 2013] 86.293700 total counts/ 28.401700 bgd. counts: snr = 10.862915
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.017318 pixels
  Position = (187.5, 220.6) = 11 19 42.20 21 15 18.4
  Extent = 6.1 (4.7-7.6)", rotation angle = 0
  Source counts = 57.9 +/- 9.3
  Background counts = 28.4
  Rate = 0.007 +/- 0.001
[Sun Jun  2 08:10:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:44 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:10:44 2013] Source does appear to be extended
[Sun Jun  2 08:10:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:40:50 2013] XMMSAS src. selection expression = ellipse(16260.787600, 19142.186000, 365.710266, 365.710266, 0.000000, X, Y)
[Sun Jun  2 08:40:50 2013] Not overwriting source region fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  2 08:40:50 2013] Extracting stamp from image fullrun_mos2_xmm0111290401_pi300-10000_cl_sm2.00.img.gz, (166, 200) - (208, 242)
[Sun Jun  2 08:40:50 2013] XMMSAS bgd. selection expression = annulus(16260.787600, 19142.186000, 609.517109, 1219.034219, X, Y)
[Sun Jun  2 08:40:50 2013] Writing fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2.gif
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/events/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111290401/products/events/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Jun  2 08:40:50 2013] Mean detx,y = (-10455.81, 243.77) 
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/images/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111290401/products/images/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/spectra/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111290401/products/spectra/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Jun  2 08:40:50 2013] Setting source spectrum file to fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  2 08:40:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  2 08:40:50 2013] ../../xmm0111290401/products/lightcurves/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111290401/products/lightcurves/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Jun  2 08:40:52 2013] Not generating rmf since there are only 57 counts
[Sun Jun  2 08:40:52 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:40:52 2013] fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun Jun  2 08:41:11 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:41:11 2013] Total counts from fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 62.00
[Sun Jun  2 08:41:12 2013] Total counts from fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 47.00
[Sun Jun  2 08:41:12 2013] Got source and background scale factors 392688.000000, 3262148.000000
[Sun Jun  2 08:41:12 2013] User source parameters:
  Position = (187.5, 220.6) = 11 19 42.20 21 15 18.4
  Extent = 6.1 (4.7-7.6)", rotation angle = 0
  Source aperture counts = 56.3 +/- 8.9
  Background aperture counts = 5.7
  Rate = 0.007 +/- 0.001

[Sun Jun  2 08:41:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:41:14 2013] Using photon index=1.80, rate=0.00679, arf fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2.arf
[Sun Jun  2 08:41:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:41:14 2013] Updating source flux to 1.3e-13
[Sun Jun  2 08:41:21 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 08:41:24 2013] xmm0111290401/analysis//spectral/fullrun_mos2_xmm0111290401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete