[Sun Jun  2 08:09:29 2013] Detection parameters:
  Position = (374.8, 309.0) = 11 18 43.89 21 21 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.6 +/- 10.7
  Background counts = 2.4
  Rate = 0.01 +/- 0.002

[Sun Jun  2 08:09:30 2013] Off-axis axis estimate = 5.59'
[Sun Jun  2 08:09:58 2013] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:09:58 2013] Initial guess for spatial extent in simple fitting = 9.22"
[Sun Jun  2 08:09:58 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.092
[Sun Jun  2 08:09:58 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.22"
[Sun Jun  2 08:09:59 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun  2 08:09:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2.csv
[Sun Jun  2 08:09:59 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun  2 08:09:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2.csv
[Sun Jun  2 08:09:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:09:59 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun  2 08:09:59 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun  2 08:09:59 2013] Fit fullrun_mos1_xmm0111290401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jun  2 08:10:14 2013] Spatial fit model total counts = 94.207500, observed total counts = 92.000000
[Sun Jun  2 08:10:14 2013] Offset between fit and detection position for source 2 = 0.296863 pixels
[Sun Jun  2 08:10:14 2013] 94.083800 total counts/ 26.342200 bgd. counts: snr = 13.198647
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.296863 pixels
  Position = (374.6, 309.2) = 11 18 43.97 21 21 44.2
  Extent = 7.5 (5.8-9.2)", rotation angle = 0
  Source counts = 67.7 +/- 9.7
  Background counts = 26.3
  Rate = 0.008 +/- 0.001
[Sun Jun  2 08:10:14 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:14 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:10:14 2013] Source does appear to be extended
[Sun Jun  2 08:10:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:10:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:10:30 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sun Jun  2 08:10:30 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.014
[Sun Jun  2 08:10:30 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Sun Jun  2 08:10:31 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun  2 08:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2.csv
[Sun Jun  2 08:10:31 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun  2 08:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2.csv
[Sun Jun  2 08:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:10:31 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun  2 08:10:31 2013] fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun  2 08:10:31 2013] Fit fullrun_mos1_xmm0111290401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jun  2 08:10:41 2013] Spatial fit model total counts = 93.387200, observed total counts = 91.000000
[Sun Jun  2 08:10:41 2013] Offset between fit and detection position for source 2 = 0.039526 pixels
[Sun Jun  2 08:10:41 2013] 93.891400 total counts/ 24.981800 bgd. counts: snr = 13.786939
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.039526 pixels
  Position = (374.5, 309.2) = 11 18 43.98 21 21 44.1
  Extent = 7.7 (5.8-9.3)", rotation angle = 0
  Source counts = 68.9 +/- 9.7
  Background counts = 25.0
  Rate = 0.008 +/- 0.001
[Sun Jun  2 08:10:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:10:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:10:41 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 08:10:41 2013] Source does appear to be extended
[Sun Jun  2 08:10:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:40:48 2013] XMMSAS src. selection expression = ellipse(32534.730400, 26853.679600, 460.666813, 460.666813, 0.000000, X, Y)
[Sun Jun  2 08:40:48 2013] Not overwriting source region fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  2 08:40:48 2013] Extracting stamp from image fullrun_mos1_xmm0111290401_pi300-10000_cl_sm2.00.img.gz, (348, 283) - (401, 336)
[Sun Jun  2 08:40:48 2013] XMMSAS bgd. selection expression = annulus(32534.730400, 26853.679600, 767.778022, 1535.556044, X, Y)
[Sun Jun  2 08:40:48 2013] Writing fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2.gif
[Sun Jun  2 08:40:48 2013] ../../xmm0111290401/products/events/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111290401/products/events/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Jun  2 08:40:48 2013] Mean detx,y = (668.79, -7725.12) 
[Sun Jun  2 08:40:48 2013] ../../xmm0111290401/products/images/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111290401/products/images/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Jun  2 08:40:48 2013] ../../xmm0111290401/products/spectra/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111290401/products/spectra/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Jun  2 08:40:48 2013] Setting source spectrum file to fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  2 08:40:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  2 08:40:48 2013] ../../xmm0111290401/products/lightcurves/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111290401/products/lightcurves/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Jun  2 08:40:50 2013] Not generating rmf since there are only 68 counts
[Sun Jun  2 08:40:50 2013] rmf not generated due to insufficient counts
[Sun Jun  2 08:40:50 2013] fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun Jun  2 08:41:09 2013] Updating aperture counts using extracted products
[Sun Jun  2 08:41:09 2013] Total counts from fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 78.00
[Sun Jun  2 08:41:09 2013] Total counts from fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 46.00
[Sun Jun  2 08:41:09 2013] Got source and background scale factors 668800.000000, 3973416.000000
[Sun Jun  2 08:41:09 2013] User source parameters:
  Position = (374.5, 309.2) = 11 18 43.98 21 21 44.1
  Extent = 7.7 (5.8-9.3)", rotation angle = 0
  Source aperture counts = 70.3 +/- 9.9
  Background aperture counts = 7.7
  Rate = 0.008 +/- 0.001

[Sun Jun  2 08:41:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 08:41:10 2013] Using photon index=1.80, rate=0.00809, arf fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2.arf
[Sun Jun  2 08:41:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 08:41:10 2013] Updating source flux to 1.3e-13
[Sun Jun  2 08:41:16 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 08:41:21 2013] xmm0111290401/analysis//spectral/fullrun_mos1_xmm0111290401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete