[Sun May  5 15:27:21 2013] Detection parameters:
  Position = (245.5, 322.1) = 11 18 50.62 40 25 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.8 +/- 15.9
  Background counts = 24.6
  Rate = 0.01 +/- 0.001

[Sun May  5 15:27:21 2013] Off-axis axis estimate = 4.20'
[Sun May  5 15:27:38 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:38 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Sun May  5 15:27:38 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.032
[Sun May  5 15:27:38 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.53"
[Sun May  5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19.ximg exists
[Sun May  5 15:27:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19.csv
[Sun May  5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun May  5 15:27:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19.csv
[Sun May  5 15:27:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun May  5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun May  5 15:27:39 2013] Fit fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun May  5 15:27:46 2013] Spatial fit model total counts = 409.380000, observed total counts = 406.000000
[Sun May  5 15:27:46 2013] Offset between fit and detection position for source 20 = 0.532661 pixels
[Sun May  5 15:27:46 2013] 412.862000 total counts/ 298.009000 bgd. counts: snr = 6.653155
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.532661 pixels
  Position = (245.0, 322.1) = 11 18 50.83 40 25 55.0
  Extent = 8.1 (5.9-10.1)", rotation angle = 0
  Source counts = 114.9 +/- 20.3
  Background counts = 298.0
  Rate = 0.007 +/- 0.001
[Sun May  5 15:27:46 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:27:46 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:27:46 2013] Source does appear to be extended
[Sun May  5 15:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 15:27:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:58 2013] Initial guess for spatial extent in simple fitting = 8.08"
[Sun May  5 15:27:58 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Sun May  5 15:27:58 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 8.08"
[Sun May  5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14.ximg exists
[Sun May  5 15:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14.csv
[Sun May  5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun May  5 15:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14.csv
[Sun May  5 15:27:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun May  5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun May  5 15:27:59 2013] Fit fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun May  5 15:28:06 2013] Warning, spatial fit 14 centroid is now closest to src. 17
[Sun May  5 15:28:06 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:28:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:28:06 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:28:06 2013] Source does appear to be extended
[Sun May  5 15:28:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 15:28:18 2013] XMMSAS src. selection expression = ellipse(21264.790636, 27974.813000, 485.038814, 485.038814, 0.000000, X, Y)
[Sun May  5 15:28:18 2013] Not overwriting source region fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_src.reg
[Sun May  5 15:28:18 2013] Extracting stamp from image fullrun_pn_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (217, 294) - (273, 350)
[Sun May  5 15:28:18 2013] XMMSAS bgd. selection expression = annulus(21264.790636, 27974.813000, 808.398023, 1616.796047, X, Y)
[Sun May  5 15:28:18 2013] Writing fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20.gif
[Sun May  5 15:31:09 2013] Mean detx,y = (-3951.28, -2714.29) 
[Sun May  5 15:31:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 15:31:25 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 15:31:26 2013] Setting source spectrum file to fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May  5 15:31:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun May  5 16:25:10 2013] Updating aperture counts using extracted products
[Sun May  5 16:25:10 2013] Total counts from fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 236.00
[Sun May  5 16:25:10 2013] Total counts from fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_bgd.pi.gz = 778.00
[Sun May  5 16:25:10 2013] Got source and background scale factors 739200.000000, 4912208.000000
[Sun May  5 16:25:10 2013] User source parameters:
  Position = (245.0, 322.1) = 11 18 50.83 40 25 55.0
  Extent = 8.1 (5.9-10.1)", rotation angle = 0
  Source aperture counts = 118.9 +/- 16.4
  Background aperture counts = 117.1
  Rate = 0.008 +/- 0.001

[Sun May  5 16:25:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 16:25:11 2013] Using photon index=1.80, rate=0.00726, arf fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20.arf
[Sun May  5 16:25:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 16:25:11 2013] Updating source flux to 2.6e-14
[Sun May  5 16:25:23 2013] xmm0111290301/analysis//spectral/fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete