[Sun May 5 15:27:21 2013] Detection parameters: Position = (412.4, 374.1) = 11 17 47.01 40 29 41.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 99.0 +/- 13.4 Background counts = 20.2 Rate = 0.01 +/- 0.002 [Sun May 5 15:27:21 2013] Off-axis axis estimate = 9.92' [Sun May 5 15:27:38 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Sun May 5 15:27:38 2013] Initial guess for spatial extent in simple fitting = 11.39" [Sun May 5 15:27:38 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926 [Sun May 5 15:27:38 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.39" [Sun May 5 15:27:38 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11.ximg exists [Sun May 5 15:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11.csv [Sun May 5 15:27:38 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11_1.ximg exists [Sun May 5 15:27:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11.csv [Sun May 5 15:27:38 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Sun May 5 15:27:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11.csv [Sun May 5 15:27:39 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Sun May 5 15:27:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11.csv [Sun May 5 15:27:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:27:46 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.583562 pixels away [Sun May 5 15:27:46 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:27:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:27:46 2013] Assessing source extent using major [Sun May 5 15:27:46 2013] Source does appear to be extended [Sun May 5 15:27:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 15:27:58 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Sun May 5 15:27:58 2013] Initial guess for spatial extent in simple fitting = 11.39" [Sun May 5 15:27:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926 [Sun May 5 15:27:58 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.39" [Sun May 5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src8.ximg exists [Sun May 5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src8_1.ximg exists [Sun May 5 15:27:59 2013] Fit fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_src8 appears to have run properly [Sun May 5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sun May 5 15:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8.csv [Sun May 5 15:27:59 2013] fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sun May 5 15:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8.csv [Sun May 5 15:27:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:28:06 2013] Source 12 is offset by 4.153109 and 2.333891 pixels which is larger than 2 X fitted extent = 1.277908 x 1.277908, not incorporating fit results [Sun May 5 15:28:06 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.917469 pixels away [Sun May 5 15:28:06 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:28:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:28:06 2013] Assessing source extent using major [Sun May 5 15:28:06 2013] Source does appear to be extended [Sun May 5 15:28:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 15:28:18 2013] XMMSAS src. selection expression = ellipse(35828.244476, 32499.124481, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 15:28:18 2013] Not overwriting source region fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_src.reg [Sun May 5 15:28:18 2013] Extracting stamp from image fullrun_pn_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (375, 337) - (450, 412) [Sun May 5 15:28:18 2013] XMMSAS bgd. selection expression = annulus(35828.244476, 32499.124481, 1087.500000, 2175.000000, X, Y) && !ellipse(34553.864929, 33128.990356, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 15:28:18 2013] Writing fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12.gif [Sun May 5 15:29:18 2013] Mean detx,y = (10757.42, 1045.70) [Sun May 5 15:29:19 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 15:29:29 2013] Binned source spectrum to 10 counts/bin [Sun May 5 15:29:30 2013] Setting source spectrum file to fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Sun May 5 15:29:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_bgd.pi.gz [Sun May 5 16:03:00 2013] Not generating rmf since there are only 98 counts [Sun May 5 16:03:00 2013] rmf not generated due to insufficient counts [Sun May 5 16:25:09 2013] Updating aperture counts using extracted products [Sun May 5 16:25:09 2013] Total counts from fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 201.00 [Sun May 5 16:25:09 2013] Total counts from fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 837.00 [Sun May 5 16:25:10 2013] Got source and background scale factors 1220111.000000, 8604630.000000 [Sun May 5 16:25:10 2013] User source parameters: Position = (412.4, 374.1) = 11 17 47.01 40 29 41.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 82.3 +/- 15.2 Background aperture counts = 118.7 Rate = 0.005 +/- 0.001 [Sun May 5 16:25:10 2013] Updating counts from extracted products [Sun May 5 16:25:10 2013] Set source signif. to 82.32/10.89 = 7.56 [Sun May 5 16:25:11 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 16:25:11 2013] Using photon index=1.80, rate=0.0052, arf fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12.arf [Sun May 5 16:25:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 16:25:11 2013] Updating source flux to 2.3e-14 [Sun May 5 16:25:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 16:25:23 2013] xmm0111290301/analysis//spectral/fullrun_pn_xmm0111290301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete