[Sun May 5 15:27:22 2013] Detection parameters: Position = (365.5, 174.7) = 11 18 4.98 40 15 12.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 118.6 +/- 13.7 Background counts = 7.3 Rate = 0.006 +/- 0.0007 [Sun May 5 15:27:23 2013] Off-axis axis estimate = 10.21' [Sun May 5 15:27:40 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting [Sun May 5 15:27:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 15:27:40 2013] Initial guess for spatial extent in simple fitting = 11.53" [Sun May 5 15:27:40 2013] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.058 [Sun May 5 15:27:40 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.53" [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6.ximg exists [Sun May 5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6.csv [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6_1.ximg exists [Sun May 5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6.csv [Sun May 5 15:27:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sun May 5 15:27:41 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Sun May 5 15:27:51 2013] Spatial fit model total counts = 168.478000, observed total counts = 166.000000 [Sun May 5 15:27:51 2013] Offset between fit and detection position for source 5 = 0.189302 pixels [Sun May 5 15:27:51 2013] 169.918900 total counts/ 87.072100 bgd. counts: snr = 8.878431 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.189302 pixels Position = (365.5, 174.5) = 11 18 4.98 40 15 12.7 Extent = 5.1 (4.0-6.6)", rotation angle = 0 Source counts = 82.8 +/- 13.0 Background counts = 87.1 Rate = 0.004 +/- 0.0006 [Sun May 5 15:27:51 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:27:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:27:51 2013] Assessing source extent using major axis lower bound [Sun May 5 15:27:51 2013] Source does appear to be extended [Sun May 5 15:27:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 15:28:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 5 15:28:00 2013] Initial guess for spatial extent in simple fitting = 5.12" [Sun May 5 15:28:00 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.799 [Sun May 5 15:28:00 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.12" [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src6.ximg exists [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src6_1.ximg exists [Sun May 5 15:28:01 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src6 appears to have run properly [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Sun May 5 15:28:01 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Sun May 5 15:28:11 2013] Spatial fit model total counts = 167.140000, observed total counts = 166.000000 [Sun May 5 15:28:11 2013] Offset between fit and detection position for source 5 = 0.058962 pixels [Sun May 5 15:28:11 2013] 168.702600 total counts/ 87.243400 bgd. counts: snr = 8.721152 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.058962 pixels Position = (365.4, 174.4) = 11 18 5.00 40 15 12.5 Extent = 6.4 (5.1-8.4)" x 3.7 (2.8-5.0)", rotation angle = 340 (322-355) degrees Source counts = 81.5 +/- 13.0 Background counts = 87.2 Rate = 0.004 +/- 0.0006 [Sun May 5 15:28:11 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:28:11 2013] Assessing source extent using major axis lower bound [Sun May 5 15:28:11 2013] Source does appear to be extended [Sun May 5 15:28:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02 [Sun May 5 16:17:15 2013] XMMSAS src. selection expression = ellipse(31745.551000, 15127.780200, 382.433411, 220.152006, 339.773700, X, Y) [Sun May 5 16:17:15 2013] Writing source region out to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_src.reg [Sun May 5 16:17:15 2013] Extracting stamp from image fullrun_mos2_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (343, 152) - (387, 196) [Sun May 5 16:17:15 2013] XMMSAS bgd. selection expression = annulus(31745.551000, 15127.780200, 637.389018, 1274.778037, X, Y) && !ellipse(31494.358400, 16219.865600, 520.619215, 520.619215, 0.000000, X, Y) [Sun May 5 16:17:15 2013] Writing fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5.gif [Sun May 5 16:18:57 2013] Mean detx,y = (1768.67, -13877.61) [Sun May 5 16:18:58 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 16:19:06 2013] Binned source spectrum to 10 counts/bin [Sun May 5 16:19:06 2013] Setting source spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sun May 5 16:19:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sun May 5 16:24:09 2013] Not generating rmf since there are only 81 counts [Sun May 5 16:24:09 2013] rmf not generated due to insufficient counts [Sun May 5 16:25:14 2013] Updating aperture counts using extracted products [Sun May 5 16:25:14 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 87.00 [Sun May 5 16:25:14 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 119.00 [Sun May 5 16:25:14 2013] Got source and background scale factors 256000.000000, 3014500.000000 [Sun May 5 16:25:14 2013] User source parameters: Position = (365.4, 174.4) = 11 18 5.00 40 15 12.5 Extent = 6.4 (5.1-8.4)" x 3.7 (2.8-5.0)", rotation angle = 340 (322-355) degrees Source aperture counts = 76.9 +/- 10.4 Background aperture counts = 10.1 Rate = 0.004 +/- 0.0005 [Sun May 5 16:25:15 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 16:25:15 2013] Using photon index=1.80, rate=0.00397, arf fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5.arf [Sun May 5 16:25:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 16:25:15 2013] Updating source flux to 1.3e-13 [Sun May 5 16:25:18 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 5 16:25:19 2013] xmm0111290301/analysis//spectral/fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete