[Sun May 5 15:27:22 2013] Detection parameters: Position = (408.1, 211.2) = 11 17 48.76 40 17 52.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 131.0 +/- 14.6 Background counts = 7.2 Rate = 0.01 +/- 0.001 [Sun May 5 15:27:23 2013] Off-axis axis estimate = 10.16' [Sun May 5 15:27:40 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting [Sun May 5 15:27:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 15:27:40 2013] Initial guess for spatial extent in simple fitting = 11.51" [Sun May 5 15:27:40 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910 [Sun May 5 15:27:40 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.51" [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4.ximg exists [Sun May 5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4.csv [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4_1.ximg exists [Sun May 5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4.csv [Sun May 5 15:27:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Sun May 5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Sun May 5 15:27:41 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Sun May 5 15:27:51 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.329113 pixels away [Sun May 5 15:27:51 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:27:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:27:51 2013] Assessing source extent using major [Sun May 5 15:27:51 2013] Source does appear to be extended [Sun May 5 15:27:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 15:28:00 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting [Sun May 5 15:28:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 15:28:00 2013] Initial guess for spatial extent in simple fitting = 11.51" [Sun May 5 15:28:00 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910 [Sun May 5 15:28:00 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.51" [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4.ximg exists [Sun May 5 15:28:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4.csv [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4_1.ximg exists [Sun May 5 15:28:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4.csv [Sun May 5 15:28:01 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Sun May 5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Sun May 5 15:28:01 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Sun May 5 15:28:11 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.499120 pixels away [Sun May 5 15:28:11 2013] Vigneting correction estimate = 1.000000 [Sun May 5 15:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 15:28:11 2013] Assessing source extent using major [Sun May 5 15:28:11 2013] Source does appear to be extended [Sun May 5 15:28:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 16:17:15 2013] XMMSAS src. selection expression = ellipse(35455.887238, 18328.480423, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 16:17:15 2013] Writing source region out to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_src.reg [Sun May 5 16:17:15 2013] Extracting stamp from image fullrun_mos2_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (371, 174) - (446, 249) [Sun May 5 16:17:15 2013] XMMSAS bgd. selection expression = annulus(35455.887238, 18328.480423, 1087.500000, 2175.000000, X, Y) [Sun May 5 16:17:15 2013] Writing fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4.gif [Sun May 5 16:18:35 2013] Mean detx,y = (-3065.40, -13027.57) [Sun May 5 16:18:36 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 16:18:44 2013] Binned source spectrum to 10 counts/bin [Sun May 5 16:18:44 2013] Setting source spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sun May 5 16:18:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_bgd.pi.gz [Sun May 5 16:24:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 16:24:02 2013] rmf not generated due to insufficient counts [Sun May 5 16:25:14 2013] Updating aperture counts using extracted products [Sun May 5 16:25:14 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 162.00 [Sun May 5 16:25:14 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 394.00 [Sun May 5 16:25:14 2013] Got source and background scale factors 1324464.000000, 10909944.000000 [Sun May 5 16:25:14 2013] User source parameters: Position = (408.1, 211.2) = 11 17 48.76 40 17 52.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 114.2 +/- 13.8 Background aperture counts = 47.8 Rate = 0.006 +/- 0.0007 [Sun May 5 16:25:14 2013] Updating counts from extracted products [Sun May 5 16:25:14 2013] Set source signif. to 114.17/6.92 = 16.51 [Sun May 5 16:25:15 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 16:25:15 2013] Using photon index=1.80, rate=0.00556, arf fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4.arf [Sun May 5 16:25:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 16:25:15 2013] Updating source flux to 1.1e-13 [Sun May 5 16:25:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 16:25:19 2013] xmm0111290301/analysis//spectral/fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete