[Sun May  5 15:27:22 2013] Detection parameters:
  Position = (299.0, 321.9) = 11 18 30.24 40 25 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12199.9 +/- 131.3
  Background counts = 12.2
  Rate = 0.6 +/- 0.007

[Sun May  5 15:27:23 2013] Off-axis axis estimate = 1.70'
[Sun May  5 15:27:40 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:40 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun May  5 15:27:40 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun May  5 15:27:40 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun May  5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1.csv
[Sun May  5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  5 15:27:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1.csv
[Sun May  5 15:27:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 15:27:41 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 15:27:41 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May  5 15:27:51 2013] Spatial fit model total counts = 10854.100000, observed total counts = 10676.000000
[Sun May  5 15:27:51 2013] Offset between fit and detection position for source 1 = 0.202509 pixels
[Sun May  5 15:27:51 2013] 10853.670000 total counts/ 2394.120000 bgd. counts: snr = 172.891764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.202509 pixels
  Position = (298.8, 321.8) = 11 18 30.32 40 25 53.8
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 8459.5 +/- 104.2
  Background counts = 2394.1
  Rate = 0.4 +/- 0.005
[Sun May  5 15:27:51 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:27:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:27:51 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:27:51 2013] Source does appear to be extended
[Sun May  5 15:27:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 15:28:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 15:28:00 2013] Initial guess for spatial extent in simple fitting = 5.35"
[Sun May  5 15:28:00 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.338
[Sun May  5 15:28:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Sun May  5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  5 15:28:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1.csv
[Sun May  5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  5 15:28:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1.csv
[Sun May  5 15:28:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 15:28:01 2013] fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 15:28:01 2013] Fit fullrun_mos2_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May  5 15:28:11 2013] Spatial fit model total counts = 10870.800000, observed total counts = 10696.000000
[Sun May  5 15:28:11 2013] Offset between fit and detection position for source 1 = 0.016004 pixels
[Sun May  5 15:28:11 2013] 10956.090000 total counts/ 2560.440000 bgd. counts: snr = 165.919345
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016004 pixels
  Position = (298.8, 321.8) = 11 18 30.32 40 25 53.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 8395.6 +/- 104.7
  Background counts = 2560.4
  Rate = 0.4 +/- 0.005
[Sun May  5 15:28:11 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:28:11 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:28:11 2013] Source does appear to be extended
[Sun May  5 15:28:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 16:17:15 2013] Counts = 8395.650000, rescaling region sizes by 2.000000
[Sun May  5 16:17:15 2013] XMMSAS src. selection expression = ellipse(25947.226400, 27947.695100, 635.449218, 635.449218, 0.000000, X, Y)
[Sun May  5 16:17:15 2013] Writing source region out to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_src.reg
[Sun May  5 16:17:15 2013] Extracting stamp from image fullrun_mos2_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (262, 285) - (335, 358)
[Sun May  5 16:17:15 2013] XMMSAS bgd. selection expression = annulus(25947.226400, 27947.695100, 2118.164061, 4236.328122, X, Y) && !ellipse(21874.744644, 28930.680145, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 16:17:15 2013] Writing fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1.gif
[Sun May  5 16:17:18 2013] Mean detx,y = (116.05, 93.18) 
[Sun May  5 16:17:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 16:17:56 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 16:17:56 2013] Setting source spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May  5 16:17:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May  5 16:25:13 2013] Updating aperture counts using extracted products
[Sun May  5 16:25:13 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 10365.00
[Sun May  5 16:25:14 2013] Total counts from fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1580.00
[Sun May  5 16:25:14 2013] Got source and background scale factors 1258824.000000, 26686969.000000
[Sun May  5 16:25:14 2013] User source parameters:
  Position = (298.8, 321.8) = 11 18 30.32 40 25 53.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source aperture counts = 10290.5 +/- 102.8
  Background aperture counts = 74.5
  Rate = 0.5 +/- 0.005

[Sun May  5 16:25:15 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 16:25:15 2013] Using photon index=1.80, rate=0.409, arf fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1.arf
[Sun May  5 16:25:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 16:25:15 2013] Updating source flux to 4.5e-12
[Sun May  5 16:25:19 2013] xmm0111290301/analysis//spectral/fullrun_mos2_xmm0111290301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete