[Sun May  5 15:27:22 2013] Detection parameters:
  Position = (299.1, 321.9) = 11 18 30.22 40 25 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11939.1 +/- 131.3
  Background counts = 11.0
  Rate = 0.6 +/- 0.006

[Sun May  5 15:27:22 2013] Off-axis axis estimate = 1.70'
[Sun May  5 15:27:39 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:39 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun May  5 15:27:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun May  5 15:27:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  5 15:27:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1.csv
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  5 15:27:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1.csv
[Sun May  5 15:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 15:27:40 2013] Fit fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May  5 15:27:49 2013] Spatial fit model total counts = 10381.800000, observed total counts = 10382.000000
[Sun May  5 15:27:49 2013] Offset between fit and detection position for source 3 = 0.186845 pixels
[Sun May  5 15:27:49 2013] 10379.950000 total counts/ 2231.870000 bgd. counts: snr = 172.472889
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.186845 pixels
  Position = (298.9, 321.8) = 11 18 30.29 40 25 53.9
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 8148.1 +/- 101.9
  Background counts = 2231.9
  Rate = 0.4 +/- 0.005
[Sun May  5 15:27:49 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:27:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:27:49 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:27:49 2013] Source does appear to be extended
[Sun May  5 15:27:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 15:27:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:59 2013] Initial guess for spatial extent in simple fitting = 5.45"
[Sun May  5 15:27:59 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.301
[Sun May  5 15:27:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.45"
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  5 15:28:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1.csv
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  5 15:28:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1.csv
[Sun May  5 15:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 15:28:00 2013] Fit fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May  5 15:28:09 2013] Warning, spatial fit 1 centroid is now closest to src. 5
[Sun May  5 15:28:09 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:28:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:28:09 2013] Assessing source extent using major axis lower bound
[Sun May  5 15:28:09 2013] Source does appear to be extended
[Sun May  5 15:28:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 16:08:21 2013] Counts = 8148.080000, rescaling region sizes by 2.000000
[Sun May  5 16:08:21 2013] XMMSAS src. selection expression = ellipse(25954.257420, 27950.521800, 654.250819, 654.250819, 0.000000, X, Y)
[Sun May  5 16:08:21 2013] Writing source region out to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_src.reg
[Sun May  5 16:08:21 2013] Extracting stamp from image fullrun_mos1_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (261, 284) - (336, 359)
[Sun May  5 16:08:21 2013] XMMSAS bgd. selection expression = annulus(25954.257420, 27950.521800, 2180.836063, 4361.672126, X, Y) && !ellipse(21932.722519, 28875.028076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.858600, 29227.662400, 1275.096037, 310.926409, 96.157303, X, Y)
[Sun May  5 16:08:21 2013] Writing fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3.gif
[Sun May  5 16:08:23 2013] Mean detx,y = (313.72, -275.18) 
[Sun May  5 16:08:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 16:08:58 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 16:08:58 2013] Setting source spectrum file to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  5 16:08:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May  5 16:25:11 2013] Updating aperture counts using extracted products
[Sun May  5 16:25:11 2013] Total counts from fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 10056.00
[Sun May  5 16:25:11 2013] Total counts from fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1418.00
[Sun May  5 16:25:12 2013] Got source and background scale factors 1340800.000000, 25618445.000000
[Sun May  5 16:25:12 2013] User source parameters:
  Position = (298.9, 321.8) = 11 18 30.29 40 25 53.9
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source aperture counts = 9981.8 +/- 101.3
  Background aperture counts = 74.2
  Rate = 0.5 +/- 0.005

[Sun May  5 16:25:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 16:25:13 2013] Using photon index=1.80, rate=0.397, arf fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3.arf
[Sun May  5 16:25:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 16:25:13 2013] Updating source flux to 3.8e-12
[Sun May  5 16:25:18 2013] xmm0111290301/analysis//spectral/fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete