[Sun May  5 15:27:22 2013] Detection parameters:
  Position = (189.0, 343.6) = 11 19 12.17 40 27 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 9.3
  Background counts = 7.9
  Rate = 0.005 +/- 0.0009

[Sun May  5 15:27:22 2013] Off-axis axis estimate = 8.58'
[Sun May  5 15:27:39 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:39 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Sun May  5 15:27:39 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Sun May  5 15:27:39 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.72"
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6.ximg exists
[Sun May  5 15:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6.csv
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May  5 15:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6.csv
[Sun May  5 15:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May  5 15:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  5 15:27:40 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May  5 15:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  5 15:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:27:49 2013] Spatial fit model total counts = 117.829000, observed total counts = 103.000000
[Sun May  5 15:27:49 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 15:27:49 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:27:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:27:49 2013] Assessing source extent using major
[Sun May  5 15:27:49 2013] Source does appear to be extended
[Sun May  5 15:27:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 15:27:59 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sun May  5 15:27:59 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Sun May  5 15:27:59 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Sun May  5 15:27:59 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.72"
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6.ximg exists
[Sun May  5 15:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6.csv
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May  5 15:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6.csv
[Sun May  5 15:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May  5 15:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May  5 15:28:00 2013] fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May  5 15:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May  5 15:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111290301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 15:28:09 2013] Spatial fit model total counts = 117.153000, observed total counts = 103.000000
[Sun May  5 15:28:09 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 15:28:09 2013] Vigneting correction estimate = 1.000000
[Sun May  5 15:28:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 15:28:09 2013] Assessing source extent using major
[Sun May  5 15:28:09 2013] Source does appear to be extended
[Sun May  5 15:28:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 16:08:21 2013] XMMSAS src. selection expression = ellipse(16394.780106, 29840.513550, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 16:08:21 2013] Writing source region out to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_src.reg
[Sun May  5 16:08:21 2013] Extracting stamp from image fullrun_mos1_xmm0111290301_pi300-10000_cl_sm2.00.img.gz, (152, 306) - (227, 381)
[Sun May  5 16:08:21 2013] XMMSAS bgd. selection expression = annulus(16394.780106, 29840.513550, 1087.500000, 2175.000000, X, Y)
[Sun May  5 16:08:21 2013] Writing fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20.gif
[Sun May  5 16:09:31 2013] Mean detx,y = (6925.17, -7493.94) 
[Sun May  5 16:09:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 16:09:42 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 16:09:42 2013] Setting source spectrum file to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May  5 16:09:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun May  5 16:16:34 2013] Not generating rmf since there are only 52 counts
[Sun May  5 16:16:34 2013] rmf not generated due to insufficient counts
[Sun May  5 16:25:12 2013] Updating aperture counts using extracted products
[Sun May  5 16:25:12 2013] Total counts from fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 86.00
[Sun May  5 16:25:12 2013] Total counts from fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_bgd.pi.gz = 355.00
[Sun May  5 16:25:12 2013] Got source and background scale factors 1117386.000000, 8792287.000000
[Sun May  5 16:25:12 2013] User source parameters:
  Position = (189.0, 343.6) = 11 19 12.17 40 27 29.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.9 +/- 10.3
  Background aperture counts = 45.1
  Rate = 0.002 +/- 0.0005

[Sun May  5 16:25:12 2013] Updating counts from extracted products
[Sun May  5 16:25:12 2013] Set source signif. to 40.88/6.72 = 6.09
[Sun May  5 16:25:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 16:25:13 2013] Using photon index=1.80, rate=0.00199, arf fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20.arf
[Sun May  5 16:25:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 16:25:13 2013] Updating source flux to 3.7e-14
[Sun May  5 16:25:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 16:25:18 2013] xmm0111290301/analysis//spectral/fullrun_mos1_xmm0111290301_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete