[Fri Sep  7 12:25:53 2012] Detection parameters:
  Position = (182.3, 343.1) = 13 45 8.10 -0 19 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 13.5
  Background counts = 3.1
  Rate = 0.02 +/- 0.003

[Fri Sep  7 12:25:53 2012] Off-axis axis estimate = 9.02'
[Fri Sep  7 13:06:04 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 13:06:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 13:06:04 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Fri Sep  7 13:06:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Fri Sep  7 13:06:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.94"
[Fri Sep  7 13:21:29 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Sep  7 13:21:29 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Sep  7 13:21:29 2012] Fit fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Sep  7 13:21:29 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep  7 13:21:29 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep  7 13:21:29 2012] Fit fullrun_mos2_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep  7 13:21:37 2012] Spatial fit model total counts = 146.448000, observed total counts = 147.000000
[Fri Sep  7 13:21:37 2012] Offset between fit and detection position for source 1 = 0.308112 pixels
[Fri Sep  7 13:21:37 2012] 147.681500 total counts/ 50.537800 bgd. counts: snr = 13.664901
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.308112 pixels
  Position = (182.6, 343.3) = 13 45 8.03 -0 19 1.4
  Extent = 8.0 (6.5-9.7)" x 5.8 (5.2-6.1)", rotation angle = 319 (289-347) degrees
  Source counts = 97.1 +/- 12.2
  Background counts = 50.5
  Rate = 0.01 +/- 0.001
[Fri Sep  7 13:21:37 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 13:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 13:21:37 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 13:21:37 2012] Source does appear to be extended
[Fri Sep  7 13:21:37 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Fri Sep  7 13:56:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 13:56:37 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Fri Sep  7 13:56:37 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.926
[Fri Sep  7 13:56:37 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.87"
[Fri Sep  7 14:12:33 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Sep  7 14:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2.csv
[Fri Sep  7 14:12:33 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Sep  7 14:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2.csv
[Fri Sep  7 14:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:12:33 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep  7 14:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Sep  7 14:12:33 2012] fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep  7 14:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Sep  7 14:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:12:40 2012] Spatial fit model total counts = 117.376000, observed total counts = 147.000000
[Fri Sep  7 14:12:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 14:12:40 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 14:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 14:12:40 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 14:12:40 2012] Source does appear to be extended
[Fri Sep  7 14:12:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Fri Sep  7 14:22:56 2012] XMMSAS src. selection expression = ellipse(15836.451600, 29817.483200, 478.528214, 345.558010, 318.789384, X, Y)
[Fri Sep  7 14:22:56 2012] Writing source region out to fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep  7 14:22:56 2012] Extracting stamp from image fullrun_mos2_xmm0111282501_pi300-10000_cl_sm2.00.img.gz, (155, 316) - (210, 371)
[Fri Sep  7 14:22:56 2012] XMMSAS bgd. selection expression = annulus(15836.451600, 29817.483200, 797.547023, 1595.094046, X, Y)
[Fri Sep  7 14:22:56 2012] Writing fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1.gif
[Fri Sep  7 14:23:05 2012] Mean detx,y = (-6840.27, -8874.35) 
[Fri Sep  7 14:23:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 14:23:12 2012] grppha failed
[Fri Sep  7 14:23:12 2012] Setting source spectrum file to fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 14:23:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep  7 14:24:57 2012] Not generating rmf since there are only 97 counts
[Fri Sep  7 14:24:57 2012] rmf not generated due to insufficient counts
[Fri Sep  7 14:25:04 2012] Updating aperture counts using extracted products
[Fri Sep  7 14:25:04 2012] Error reading totcts from fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 14:25:04 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 14:25:06 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Sep  7 14:25:06 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 14:25:07 2012] xmm0111282501/analysis//spectral/fullrun_mos2_xmm0111282501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete