[Fri Sep  7 12:25:36 2012] Detection parameters:
  Position = (204.8, 274.0) = 13 45 1.59 -0 24 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.0 +/- 7.2
  Background counts = 2.1
  Rate = 0.005 +/- 0.001

[Fri Sep  7 12:25:36 2012] Off-axis axis estimate = 7.02'
[Fri Sep  7 12:49:55 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 12:49:55 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Fri Sep  7 12:49:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Fri Sep  7 12:49:55 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.94"
[Fri Sep  7 13:06:03 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6.ximg exists
[Fri Sep  7 13:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6.csv
[Fri Sep  7 13:06:03 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Sep  7 13:06:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6.csv
[Fri Sep  7 13:06:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 13:06:04 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep  7 13:06:04 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep  7 13:06:04 2012] Fit fullrun_mos1_xmm0111282501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep  7 13:21:35 2012] Spatial fit model total counts = 48.116400, observed total counts = 45.000000
[Fri Sep  7 13:21:35 2012] Offset between fit and detection position for source 10 = 0.014589 pixels
[Fri Sep  7 13:21:35 2012] 48.369500 total counts/ 24.929700 bgd. counts: snr = 4.694565
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.014589 pixels
  Position = (204.8, 274.0) = 13 45 1.59 -0 24 2.9
  Extent = 5.8 (3.9-9.0)", rotation angle = 0
  Source counts = 23.4 +/- 7.0
  Background counts = 24.9
  Rate = 0.003 +/- 0.0008
[Fri Sep  7 13:21:35 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 13:21:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 13:21:35 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 13:21:35 2012] Source does appear to be extended
[Fri Sep  7 13:21:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 13:40:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 13:40:51 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Fri Sep  7 13:40:51 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.188
[Fri Sep  7 13:40:51 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.81"
[Fri Sep  7 13:56:37 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6.ximg exists
[Fri Sep  7 13:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6.csv
[Fri Sep  7 13:56:37 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Sep  7 13:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6.csv
[Fri Sep  7 13:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 13:56:37 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep  7 13:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Sep  7 13:56:37 2012] fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep  7 13:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Sep  7 13:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111282501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 14:12:38 2012] Warning, spatial fit 6 centroid is now closest to src. 1
[Fri Sep  7 14:12:38 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 14:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 14:12:38 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 14:12:38 2012] Source does appear to be extended
[Fri Sep  7 14:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 14:19:52 2012] XMMSAS src. selection expression = ellipse(17767.582000, 23787.466400, 348.479950, 348.479950, 0.000000, X, Y)
[Fri Sep  7 14:19:52 2012] Writing source region out to fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10_src.reg
[Fri Sep  7 14:19:52 2012] Extracting stamp from image fullrun_mos1_xmm0111282501_pi300-10000_cl_sm2.00.img.gz, (185, 254) - (225, 294)
[Fri Sep  7 14:19:52 2012] XMMSAS bgd. selection expression = annulus(17767.582000, 23787.466400, 580.799917, 1161.599835, X, Y)
[Fri Sep  7 14:19:52 2012] Writing fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10.gif
[Fri Sep  7 14:20:57 2012] Mean detx,y = (-2354.38, 6986.45) 
[Fri Sep  7 14:20:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 14:21:08 2012] grppha failed
[Fri Sep  7 14:21:08 2012] Setting source spectrum file to fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10_src.pi.gz
[Fri Sep  7 14:21:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Sep  7 14:22:55 2012] Not generating rmf since there are only 23 counts
[Fri Sep  7 14:22:55 2012] rmf not generated due to insufficient counts
[Fri Sep  7 14:25:04 2012] Updating aperture counts using extracted products
[Fri Sep  7 14:25:04 2012] Error reading totcts from fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10_src.pi.gz
[Fri Sep  7 14:25:04 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 14:25:05 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep  7 14:25:06 2012] xmm0111282501/analysis//spectral/fullrun_mos1_xmm0111282501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete