[Mon Aug 27 15:50:09 2012] Detection parameters:
  Position = (214.7, 280.0) = 13 43 23.05 0 24 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.5 +/- 6.0
  Background counts = 1.9
  Rate = 0.004 +/- 0.001

[Mon Aug 27 15:50:09 2012] Off-axis axis estimate = 6.22'
[Mon Aug 27 16:27:26 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 16:27:26 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Mon Aug 27 16:27:26 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.035
[Mon Aug 27 16:27:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.54"
[Mon Aug 27 16:47:45 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Aug 27 16:47:45 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Aug 27 16:47:45 2012] Fit fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_src7 appears to have run properly
[Mon Aug 27 16:47:45 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Aug 27 16:47:45 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Aug 27 16:47:45 2012] Fit fullrun_mos2_xmm0111282401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Aug 27 16:47:54 2012] Spatial fit model total counts = 28.176800, observed total counts = 30.000000
[Mon Aug 27 16:47:54 2012] Offset between fit and detection position for source 12 = 0.061117 pixels
[Mon Aug 27 16:47:54 2012] 28.520800 total counts/ 13.012700 bgd. counts: snr = 4.299074
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.061117 pixels
  Position = (214.7, 280.0) = 13 43 23.03 0 24 20.0
  Extent = 4.5 (2.7-6.1)", rotation angle = 0
  Source counts = 15.5 +/- 5.3
  Background counts = 13.0
  Rate = 0.002 +/- 0.0008
[Mon Aug 27 16:47:54 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 16:47:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 16:47:54 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 16:47:54 2012] Source does appear to be extended
[Mon Aug 27 16:47:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:20:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:20:13 2012] Initial guess for spatial extent in simple fitting = 4.46"
[Mon Aug 27 17:20:13 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.967
[Mon Aug 27 17:20:13 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.46"
[Mon Aug 27 17:39:02 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Aug 27 17:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7.csv
[Mon Aug 27 17:39:02 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Aug 27 17:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7.csv
[Mon Aug 27 17:39:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:39:02 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Aug 27 17:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Aug 27 17:39:02 2012] fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Aug 27 17:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Aug 27 17:39:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111282401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:39:09 2012] Spatial fit model total counts = 26.887200, observed total counts = 29.000000
[Mon Aug 27 17:39:09 2012] Offset between fit and detection position for source 12 = 0.014257 pixels
[Mon Aug 27 17:39:09 2012] 27.430500 total counts/ 11.751400 bgd. counts: snr = 4.573791
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.014257 pixels
  Position = (214.7, 280.0) = 13 43 23.03 0 24 19.9
  Extent = 4.5 (2.7-6.6)", rotation angle = 0
  Source counts = 15.7 +/- 5.2
  Background counts = 11.8
  Rate = 0.002 +/- 0.0008
[Mon Aug 27 17:39:09 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 17:39:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 17:39:09 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 17:39:09 2012] Source does appear to be extended
[Mon Aug 27 17:39:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 17:47:27 2012] XMMSAS src. selection expression = ellipse(18634.472200, 24308.210000, 270.137408, 270.137408, 0.000000, X, Y)
[Mon Aug 27 17:47:27 2012] Writing source region out to fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12_src.reg
[Mon Aug 27 17:47:27 2012] Extracting stamp from image fullrun_mos2_xmm0111282401_pi300-10000_cl_sm2.00.img.gz, (199, 264) - (230, 295)
[Mon Aug 27 17:47:27 2012] XMMSAS bgd. selection expression = annulus(18634.472200, 24308.210000, 450.229013, 900.458026, X, Y) && !ellipse(17443.764320, 24464.636600, 617.435218, 229.504807, 93.654310, X, Y)
[Mon Aug 27 17:47:27 2012] Writing fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12.gif
[Mon Aug 27 17:48:11 2012] Mean detx,y = (-6133.47, -3042.00) 
[Mon Aug 27 17:48:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 17:48:20 2012] grppha failed
[Mon Aug 27 17:48:20 2012] Setting source spectrum file to fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12_src.pi.gz
[Mon Aug 27 17:48:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Aug 27 17:50:12 2012] Not generating rmf since there are only 15 counts
[Mon Aug 27 17:50:12 2012] rmf not generated due to insufficient counts
[Mon Aug 27 17:50:21 2012] Updating aperture counts using extracted products
[Mon Aug 27 17:50:21 2012] Error reading totcts from fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12_src.pi.gz
[Mon Aug 27 17:50:21 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 17:50:23 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 17:50:24 2012] xmm0111282401/analysis//spectral/fullrun_mos2_xmm0111282401_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete