[Sun Jun  2 18:20:57 2013] Detection parameters:
  Position = (147.2, 258.0) = 0 57 42.91 -27 37 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.8 +/- 6.9
  Background counts = 4.0
  Rate = 0.005 +/- 0.001

[Sun Jun  2 18:20:58 2013] Off-axis axis estimate = 11.35'
[Sun Jun  2 18:22:36 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 18:22:36 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Jun  2 18:22:36 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Sun Jun  2 18:22:36 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.10"
[Sun Jun  2 18:57:38 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun  2 18:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11.csv
[Sun Jun  2 18:57:38 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun  2 18:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11.csv
[Sun Jun  2 18:57:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 18:57:38 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun  2 18:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  2 18:57:38 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun  2 18:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun  2 18:57:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 20:07:07 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.914394 pixels away
[Sun Jun  2 20:07:07 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 20:07:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 20:07:07 2013] Assessing source extent using major
[Sun Jun  2 20:07:07 2013] Source does appear to be extended
[Sun Jun  2 20:07:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 20:07:31 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 20:07:31 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Jun  2 20:07:31 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Sun Jun  2 20:07:31 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 12.10"
[Sun Jun  2 20:46:41 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun  2 20:46:41 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun  2 20:46:41 2013] Fit fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Jun  2 20:46:41 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun  2 20:46:41 2013] fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun  2 20:46:41 2013] Fit fullrun_pn_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun  2 21:50:11 2013] Spatial fit model total counts = 67.732800, observed total counts = 62.000000
[Sun Jun  2 21:50:11 2013] Offset between fit and detection position for source 11 = 0.316109 pixels
[Sun Jun  2 21:50:11 2013] 67.396000 total counts/ 48.558500 bgd. counts: snr = 2.703278
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.316109 pixels
  Position = (147.1, 258.4) = 0 57 42.94 -27 38 0.6
  Extent = 6.1 (4.0-9.3)", rotation angle = 0
  Source counts = 18.8 +/- 8.2
  Background counts = 48.6
  Rate = 0.004 +/- 0.002
[Sun Jun  2 21:50:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 21:50:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 21:50:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 21:50:11 2013] Source does appear to be extended
[Sun Jun  2 21:50:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 21:50:24 2013] XMMSAS src. selection expression = ellipse(12751.354400, 22428.107180, 368.779211, 368.779211, 0.000000, X, Y)
[Sun Jun  2 21:50:24 2013] Writing source region out to fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun  2 21:50:24 2013] Extracting stamp from image fullrun_pn_xmm0111282001_pi300-10000_cl_sm2.00.img.gz, (126, 237) - (168, 280)
[Sun Jun  2 21:50:24 2013] XMMSAS bgd. selection expression = annulus(12751.354400, 22428.107180, 614.632018, 1229.264035, X, Y)
[Sun Jun  2 21:50:24 2013] Writing fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11.gif
[Sun Jun  2 21:56:29 2013] Mean detx,y = (9148.76, -7577.10) 
[Sun Jun  2 21:56:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 21:56:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 21:56:47 2013] Setting source spectrum file to fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun  2 21:56:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun  2 22:07:47 2013] Not generating rmf since there are only 18 counts
[Sun Jun  2 22:07:47 2013] rmf not generated due to insufficient counts
[Sun Jun  2 22:23:56 2013] Updating aperture counts using extracted products
[Sun Jun  2 22:23:56 2013] Total counts from fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 29.00
[Sun Jun  2 22:23:56 2013] Total counts from fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_bgd.pi.gz = 55.00
[Sun Jun  2 22:23:56 2013] Got source and background scale factors 427200.000000, 3260921.000000
[Sun Jun  2 22:23:56 2013] User source parameters:
  Position = (147.1, 258.4) = 0 57 42.94 -27 38 0.6
  Extent = 6.1 (4.0-9.3)", rotation angle = 0
  Source aperture counts = 21.8 +/- 6.5
  Background aperture counts = 7.2
  Rate = 0.005 +/- 0.001

[Sun Jun  2 22:23:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 22:23:59 2013] Using photon index=1.80, rate=0.00389, arf fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11.arf
[Sun Jun  2 22:23:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 22:23:59 2013] Updating source flux to 2.2e-14
[Sun Jun  2 22:24:10 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 22:24:12 2013] xmm0111282001/analysis//spectral/fullrun_pn_xmm0111282001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete