[Sun Jun  2 18:21:25 2013] Detection parameters:
  Position = (406.0, 359.2) = 0 56 18.25 -27 30 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.0 +/- 14.3
  Background counts = 2.3
  Rate = 0.02 +/- 0.002

[Sun Jun  2 18:21:26 2013] Off-axis axis estimate = 8.96'
[Sun Jun  2 18:57:38 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 18:57:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 18:57:38 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Sun Jun  2 18:57:38 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sun Jun  2 18:57:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.91"
[Sun Jun  2 19:29:12 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 19:29:12 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 19:29:12 2013] Fit fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun  2 19:29:12 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 19:29:12 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 19:29:12 2013] Fit fullrun_mos1_xmm0111282001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  2 20:07:12 2013] Spatial fit model total counts = 184.006000, observed total counts = 182.000000
[Sun Jun  2 20:07:12 2013] Offset between fit and detection position for source 2 = 0.608711 pixels
[Sun Jun  2 20:07:12 2013] 185.912700 total counts/ 64.468700 bgd. counts: snr = 15.125217
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.608711 pixels
  Position = (405.6, 359.7) = 0 56 18.39 -27 30 40.1
  Extent = 9.2 (7.5-11.4)" x 5.8 (4.8-6.9)", rotation angle = 62 (43-77) degrees
  Source counts = 121.4 +/- 13.6
  Background counts = 64.5
  Rate = 0.01 +/- 0.002
[Sun Jun  2 20:07:12 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 20:07:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 20:07:12 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 20:07:12 2013] Source does appear to be extended
[Sun Jun  2 20:07:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sun Jun  2 20:46:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 20:46:41 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Jun  2 20:46:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.271
[Sun Jun  2 20:46:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.47"
[Sun Jun  2 21:15:03 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 21:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 21:15:03 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 21:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 21:15:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 21:15:03 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 21:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 21:15:03 2013] fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 21:15:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 21:15:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111282001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 21:50:14 2013] Warning, spatial fit 1 centroid is now closest to src. 15
[Sun Jun  2 21:50:14 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 21:50:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 21:50:14 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 21:50:14 2013] Source does appear to be extended
[Sun Jun  2 21:50:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sun Jun  2 22:09:04 2013] XMMSAS src. selection expression = ellipse(35234.377000, 31243.261200, 549.103816, 347.579410, 62.042362, X, Y)
[Sun Jun  2 22:09:04 2013] Writing source region out to fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  2 22:09:04 2013] Extracting stamp from image fullrun_mos1_xmm0111282001_pi300-10000_cl_sm2.00.img.gz, (374, 328) - (437, 391)
[Sun Jun  2 22:09:04 2013] XMMSAS bgd. selection expression = annulus(35234.377000, 31243.261200, 915.173026, 1830.346053, X, Y)
[Sun Jun  2 22:09:04 2013] Writing fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2.gif
[Sun Jun  2 22:09:06 2013] Mean detx,y = (-10388.07, -7268.26) 
[Sun Jun  2 22:09:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 22:09:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 22:09:25 2013] Setting source spectrum file to fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  2 22:09:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  2 22:23:59 2013] Updating aperture counts using extracted products
[Sun Jun  2 22:23:59 2013] Total counts from fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 130.00
[Sun Jun  2 22:23:59 2013] Total counts from fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 77.00
[Sun Jun  2 22:23:59 2013] Got source and background scale factors 603200.000000, 7126548.000000
[Sun Jun  2 22:23:59 2013] User source parameters:
  Position = (405.6, 359.7) = 0 56 18.39 -27 30 40.1
  Extent = 9.2 (7.5-11.4)" x 5.8 (4.8-6.9)", rotation angle = 62 (43-77) degrees
  Source aperture counts = 123.5 +/- 12.4
  Background aperture counts = 6.5
  Rate = 0.01 +/- 0.001

[Sun Jun  2 22:24:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 22:24:02 2013] Using photon index=1.80, rate=0.0145, arf fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2.arf
[Sun Jun  2 22:24:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 22:24:02 2013] Updating source flux to 4.2e-13
[Sun Jun  2 22:24:08 2013] xmm0111282001/analysis//spectral/fullrun_mos1_xmm0111282001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete