[Sat May 18 01:23:43 2013] Detection parameters:
  Position = (281.6, 266.5) = 13 43 6.40 -0 28 8.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 29.4 +/- 17.2
  Background counts = 63.9
  Rate = 0.01 +/- 0.007

[Sat May 18 01:23:43 2013] Off-axis axis estimate = 2.62'
[Sat May 18 01:25:50 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:25:50 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Sat May 18 01:25:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.818
[Sat May 18 01:25:50 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.74"
[Sat May 18 01:42:08 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6.ximg exists
[Sat May 18 01:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6.csv
[Sat May 18 01:42:08 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May 18 01:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6.csv
[Sat May 18 01:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 01:42:08 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May 18 01:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 18 01:42:08 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May 18 01:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 18 01:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111281701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 02:23:13 2013] Spatial fit model total counts = 141.867000, observed total counts = 99.000000
[Sat May 18 02:23:13 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 02:23:13 2013] Vigneting correction estimate = 1.000000
[Sat May 18 02:23:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 02:23:13 2013] Assessing source extent using major
[Sat May 18 02:23:13 2013] Source does appear to be extended
[Sat May 18 02:23:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:23:28 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat May 18 02:23:28 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Sat May 18 02:23:28 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.818
[Sat May 18 02:23:28 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.74"
[Sat May 18 02:37:38 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_src6.ximg exists
[Sat May 18 02:37:38 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat May 18 02:37:38 2013] Fit fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat May 18 02:37:39 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat May 18 02:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 18 02:37:39 2013] fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May 18 02:37:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 18 02:37:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111281701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 03:13:58 2013] Source 6 is offset by 2.041252 and -1.041301 pixels which is larger than
2 X fitted extent = 1.345701 x 6.996920, not incorporating fit results
[Sat May 18 03:13:58 2013] Vigneting correction estimate = 1.000000
[Sat May 18 03:13:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 03:13:58 2013] Assessing source extent using major
[Sat May 18 03:13:58 2013] Source does appear to be extended
[Sat May 18 03:13:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 03:14:14 2013] XMMSAS src. selection expression = ellipse(24454.648560, 23134.849426, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 18 03:14:14 2013] Writing source region out to fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_src.reg
[Sat May 18 03:14:14 2013] Extracting stamp from image fullrun_pn_xmm0111281701_pi300-10000_cl_sm2.00.img.gz, (207, 191) - (357, 341)
[Sat May 18 03:14:14 2013] XMMSAS bgd. selection expression = annulus(24454.648560, 23134.849426, 2175.000000, 4350.000000, X, Y) && !ellipse(22249.396800, 25099.830400, 357.276010, 357.276010, 0.000000, X, Y)
[Sat May 18 03:14:14 2013] Writing fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6.gif
[Sat May 18 03:18:58 2013] Mean detx,y = (-3497.72, 3530.10) 
[Sat May 18 03:19:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:20:24 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:20:25 2013] Setting source spectrum file to fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 18 03:20:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 18 03:23:14 2013] Not generating rmf since there are only 29 counts
[Sat May 18 03:23:14 2013] rmf not generated due to insufficient counts
[Sat May 18 03:34:26 2013] Updating aperture counts using extracted products
[Sat May 18 03:34:26 2013] Total counts from fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 258.00
[Sat May 18 03:34:27 2013] Total counts from fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 2204.00
[Sat May 18 03:34:27 2013] Got source and background scale factors 4417764.000000, 41287349.000000
[Sat May 18 03:34:27 2013] User source parameters:
  Position = (281.6, 266.5) = 13 43 6.40 -0 28 8.3
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 22.2 +/- 17.1
  Background aperture counts = 235.8
  Rate = 0.007 +/- 0.005

[Sat May 18 03:34:27 2013] Updating counts from extracted products
[Sat May 18 03:34:27 2013] Set source signif. to 22.17/15.36 = 1.44
[Sat May 18 03:34:28 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 03:34:28 2013] Using photon index=1.80, rate=0.0066, arf fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6.arf
[Sat May 18 03:34:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 03:34:28 2013] Updating source flux to 2.2e-14
[Sat May 18 03:34:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 03:34:38 2013] xmm0111281701/analysis//spectral/fullrun_pn_xmm0111281701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete