[Mon Jun 24 07:35:02 2013] Detection parameters:
  Position = (309.2, 349.6) = 13 41 22.41 -0 21 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 7.5
  Background counts = 4.8
  Rate = 0.009 +/- 0.002

[Mon Jun 24 07:35:02 2013] Off-axis axis estimate = 3.79'
[Mon Jun 24 07:36:10 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 07:36:10 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Mon Jun 24 07:36:10 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.073
[Mon Jun 24 07:36:10 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.32"
[Mon Jun 24 07:57:34 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 24 07:57:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 24 07:57:34 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 24 07:57:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 24 07:57:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 07:57:34 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 24 07:57:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 24 07:57:34 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 24 07:57:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 24 07:57:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111281601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 08:11:29 2013] Warning, spatial fit 5 centroid is now closest to src. 7
[Mon Jun 24 08:11:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 08:11:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 08:11:29 2013] Assessing source extent using major
[Mon Jun 24 08:11:29 2013] Source does appear to be extended
[Mon Jun 24 08:11:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 08:11:40 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 08:11:40 2013] Initial guess for spatial extent in simple fitting = 8.32"
[Mon Jun 24 08:11:40 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.073
[Mon Jun 24 08:11:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.32"
[Mon Jun 24 08:33:26 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 24 08:33:26 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 24 08:33:26 2013] Fit fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon Jun 24 08:33:26 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 24 08:33:26 2013] fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 24 08:33:26 2013] Fit fullrun_pn_xmm0111281601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 24 08:46:24 2013] Spatial fit model total counts = 64.969500, observed total counts = 63.000000
[Mon Jun 24 08:46:24 2013] Offset between fit and detection position for source 5 = 0.349665 pixels
[Mon Jun 24 08:46:24 2013] 63.289400 total counts/ 38.889700 bgd. counts: snr = 3.912616
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.349665 pixels
  Position = (308.9, 349.5) = 13 41 22.51 -0 21 57.2
  Extent = 6.3 (3.1-8.9)", rotation angle = 0
  Source counts = 24.4 +/- 8.0
  Background counts = 38.9
  Rate = 0.006 +/- 0.002
[Mon Jun 24 08:46:24 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 08:46:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 08:46:24 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 08:46:24 2013] Source does appear to be extended
[Mon Jun 24 08:46:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 08:46:31 2013] XMMSAS src. selection expression = ellipse(26826.992160, 30356.435600, 376.827011, 376.827011, 0.000000, X, Y)
[Mon Jun 24 08:46:31 2013] Writing source region out to fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 24 08:46:31 2013] Extracting stamp from image fullrun_pn_xmm0111281601_pi300-10000_cl_sm2.00.img.gz, (287, 328) - (331, 371)
[Mon Jun 24 08:46:31 2013] XMMSAS bgd. selection expression = annulus(26826.992160, 30356.435600, 628.045018, 1256.090036, X, Y) && !ellipse(28191.068200, 28663.249000, 546.526416, 425.633612, 314.930258, X, Y) && !ellipse(26695.012726, 29442.551208, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 08:46:31 2013] Writing fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5.gif
[Mon Jun 24 08:48:14 2013] Mean detx,y = (1372.17, -2326.69) 
[Mon Jun 24 08:48:16 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 08:48:29 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 08:48:29 2013] Setting source spectrum file to fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 24 08:48:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 24 08:55:10 2013] Not generating rmf since there are only 24 counts
[Mon Jun 24 08:55:10 2013] rmf not generated due to insufficient counts
[Mon Jun 24 09:07:58 2013] Updating aperture counts using extracted products
[Mon Jun 24 09:07:58 2013] Total counts from fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 35.00
[Mon Jun 24 09:07:58 2013] Total counts from fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 55.00
[Mon Jun 24 09:07:58 2013] Got source and background scale factors 443200.000000, 2352393.000000
[Mon Jun 24 09:07:58 2013] User source parameters:
  Position = (308.9, 349.5) = 13 41 22.51 -0 21 57.2
  Extent = 6.3 (3.1-8.9)", rotation angle = 0
  Source aperture counts = 24.6 +/- 7.0
  Background aperture counts = 10.4
  Rate = 0.006 +/- 0.002

[Mon Jun 24 09:08:00 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 09:08:00 2013] Using photon index=1.80, rate=0.00613, arf fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5.arf
[Mon Jun 24 09:08:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 09:08:00 2013] Updating source flux to 2e-14
[Mon Jun 24 09:08:07 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 24 09:08:09 2013] xmm0111281601/analysis//spectral/fullrun_pn_xmm0111281601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete