[Mon May 27 00:43:35 2013] Detection parameters:
  Position = (195.7, 379.0) = 13 45 7.49 0 4 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 9.6
  Background counts = 9.1
  Rate = 0.006 +/- 0.001

[Mon May 27 00:43:36 2013] Off-axis axis estimate = 9.47'
[Mon May 27 01:04:57 2013] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Mon May 27 01:04:57 2013] Initial guess for spatial extent in simple fitting = 11.16"
[Mon May 27 01:04:57 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Mon May 27 01:04:57 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.16"
[Mon May 27 01:25:22 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 27 01:25:22 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 27 01:25:22 2013] Fit fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_src8 appears to have run properly
[Mon May 27 01:25:22 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 27 01:25:22 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 27 01:25:22 2013] Fit fullrun_mos1_xmm0111281501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon May 27 01:48:07 2013] Spatial fit model total counts = 59.861300, observed total counts = 57.000000
[Mon May 27 01:48:07 2013] Offset between fit and detection position for source 4 = 0.378315 pixels
[Mon May 27 01:48:07 2013] 58.960000 total counts/ 29.029200 bgd. counts: snr = 5.555214
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.378315 pixels
  Position = (196.1, 379.1) = 13 45 7.38 0 4 8.3
  Extent = 8.5 (5.8-12.8)" x 3.0 (2.8-4.4)", rotation angle = 128 (114-143) degrees
  Source counts = 29.9 +/- 7.7
  Background counts = 29.0
  Rate = 0.004 +/- 0.001
[Mon May 27 01:48:07 2013] Vigneting correction estimate = 1.000000
[Mon May 27 01:48:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 01:48:07 2013] Assessing source extent using major axis lower bound
[Mon May 27 01:48:07 2013] Source does appear to be extended
[Mon May 27 01:48:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Mon May 27 02:06:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 02:06:13 2013] Initial guess for spatial extent in simple fitting = 5.73"
[Mon May 27 02:06:13 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.212
[Mon May 27 02:06:13 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 5.73"
[Mon May 27 02:24:12 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 27 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8.csv
[Mon May 27 02:24:12 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 27 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8.csv
[Mon May 27 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 02:24:12 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 27 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 02:24:12 2013] fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 27 02:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 02:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111281501_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 02:45:41 2013] Warning, spatial fit 8 centroid is now closest to src. 11
[Mon May 27 02:45:41 2013] Vigneting correction estimate = 1.000000
[Mon May 27 02:45:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 02:45:41 2013] Assessing source extent using major axis lower bound
[Mon May 27 02:45:41 2013] Source does appear to be extended
[Mon May 27 02:45:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Mon May 27 03:02:11 2013] XMMSAS src. selection expression = ellipse(17011.752660, 32932.998200, 510.028215, 177.190205, 128.470453, X, Y)
[Mon May 27 03:02:11 2013] Writing source region out to fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_src.reg
[Mon May 27 03:02:11 2013] Extracting stamp from image fullrun_mos1_xmm0111281501_pi300-10000_cl_sm2.00.img.gz, (167, 350) - (225, 408)
[Mon May 27 03:02:11 2013] XMMSAS bgd. selection expression = annulus(17011.752660, 32932.998200, 850.047024, 1700.094049, X, Y)
[Mon May 27 03:02:11 2013] Writing fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4.gif
[Mon May 27 03:06:14 2013] Mean detx,y = (8184.85, -7472.56) 
[Mon May 27 03:06:17 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 03:06:41 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 03:06:42 2013] Setting source spectrum file to fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 27 03:06:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 27 03:13:01 2013] Not generating rmf since there are only 29 counts
[Mon May 27 03:13:01 2013] rmf not generated due to insufficient counts
[Mon May 27 03:18:42 2013] Updating aperture counts using extracted products
[Mon May 27 03:18:42 2013] Total counts from fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 27.00
[Mon May 27 03:18:42 2013] Total counts from fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_bgd.pi.gz = 110.00
[Mon May 27 03:18:42 2013] Got source and background scale factors 281600.000000, 6340386.000000
[Mon May 27 03:18:42 2013] User source parameters:
  Position = (196.1, 379.1) = 13 45 7.38 0 4 8.3
  Extent = 8.5 (5.8-12.8)" x 3.0 (2.8-4.4)", rotation angle = 128 (114-143) degrees
  Source aperture counts = 22.1 +/- 6.3
  Background aperture counts = 4.9
  Rate = 0.003 +/- 0.0009

[Mon May 27 03:18:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 03:18:43 2013] Using photon index=1.80, rate=0.00418, arf fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4.arf
[Mon May 27 03:18:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 03:18:43 2013] Updating source flux to 1.2e-13
[Mon May 27 03:18:48 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 03:18:50 2013] xmm0111281501/analysis//spectral/fullrun_mos1_xmm0111281501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete