[Sun Jun 17 18:24:46 2012] Detection parameters:
  Position = (320.0, 411.5) = 13 42 55.44 0 6 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.2 +/- 13.3
  Background counts = 21.9
  Rate = 0.02 +/- 0.003

[Sun Jun 17 18:24:46 2012] Off-axis axis estimate = 8.35'
[Sun Jun 17 18:36:05 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 18:36:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 18:36:05 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Jun 17 18:36:05 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.782
[Sun Jun 17 18:36:05 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.60"
[Sun Jun 17 18:45:20 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 17 18:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 17 18:45:20 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 17 18:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 17 18:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 18:45:21 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 17 18:45:21 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 17 18:45:21 2012] Fit fullrun_mos2_xmm0111281401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jun 17 18:45:24 2012] Spatial fit model total counts = 62.664600, observed total counts = 59.000000
[Sun Jun 17 18:45:24 2012] Offset between fit and detection position for source 4 = 0.471287 pixels
[Sun Jun 17 18:45:24 2012] 64.153700 total counts/ 28.036100 bgd. counts: snr = 6.821189
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.471287 pixels
  Position = (319.6, 411.6) = 13 42 55.58 0 6 34.2
  Extent = 6.8 (4.8-9.0)", rotation angle = 0
  Source counts = 36.1 +/- 8.0
  Background counts = 28.0
  Rate = 0.009 +/- 0.002
[Sun Jun 17 18:45:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 18:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 18:45:24 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 18:45:24 2012] Source does appear to be extended
[Sun Jun 17 18:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 18:57:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 18:57:14 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Sun Jun 17 18:57:14 2012] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.890
[Sun Jun 17 18:57:14 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.75"
[Sun Jun 17 19:05:51 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 17 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2.csv
[Sun Jun 17 19:05:51 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 17 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2.csv
[Sun Jun 17 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:05:51 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 17 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 17 19:05:51 2012] fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 17 19:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 17 19:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111281401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:05:55 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Sun Jun 17 19:05:55 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:05:55 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 19:05:55 2012] Source does appear to be extended
[Sun Jun 17 19:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:14:00 2012] XMMSAS src. selection expression = ellipse(27755.053200, 35761.647800, 405.284412, 405.284412, 0.000000, X, Y)
[Sun Jun 17 19:14:00 2012] Writing source region out to fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 17 19:14:00 2012] Extracting stamp from image fullrun_mos2_xmm0111281401_pi300-10000_cl_sm2.00.img.gz, (296, 388) - (343, 435)
[Sun Jun 17 19:14:00 2012] XMMSAS bgd. selection expression = annulus(27755.053200, 35761.647800, 675.474019, 1350.948039, X, Y)
[Sun Jun 17 19:14:00 2012] Writing fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4.gif
[Sun Jun 17 19:14:12 2012] Mean detx,y = (-3783.45, 7068.98) 
[Sun Jun 17 19:14:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 19:14:22 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 19:14:22 2012] Setting source spectrum file to fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 17 19:14:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 17 19:15:42 2012] Not generating rmf since there are only 36 counts
[Sun Jun 17 19:15:42 2012] rmf not generated due to insufficient counts
[Sun Jun 17 19:16:26 2012] Updating aperture counts using extracted products
[Sun Jun 17 19:16:26 2012] Error reading totcts from fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 17 19:16:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 19:16:26 2012] Using photon index=1.80, rate=0.00856, arf fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4.arf
[Sun Jun 17 19:16:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 19:16:26 2012] Updating source flux to 1.5e-13
[Sun Jun 17 19:16:28 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 17 19:16:29 2012] xmm0111281401/analysis//spectral/fullrun_mos2_xmm0111281401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete