[Thu Jun 6 09:32:16 2013] Detection parameters: Position = (312.1, 129.2) = 13 41 21.78 -0 13 55.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 90.2 +/- 15.0 Background counts = 40.1 Rate = 0.006 +/- 0.001 [Thu Jun 6 09:32:16 2013] Off-axis axis estimate = 12.31' [Thu Jun 6 09:37:58 2013] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 09:37:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jun 6 09:37:58 2013] Initial guess for spatial extent in simple fitting = 12.58" [Thu Jun 6 09:37:58 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064 [Thu Jun 6 09:37:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.58" [Thu Jun 6 09:38:58 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_src1.ximg exists [Thu Jun 6 09:38:58 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_src1_1.ximg exists [Thu Jun 6 09:38:58 2013] Fit fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_src1 appears to have run properly [Thu Jun 6 09:38:58 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Thu Jun 6 09:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1.csv [Thu Jun 6 09:38:58 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Thu Jun 6 09:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1.csv [Thu Jun 6 09:38:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111281301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 09:38:59 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.157476 pixels away [Thu Jun 6 09:38:59 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:38:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:38:59 2013] Assessing source extent using major [Thu Jun 6 09:38:59 2013] Source does appear to be extended [Thu Jun 6 09:38:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:41:18 2013] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 09:41:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jun 6 09:41:18 2013] Initial guess for spatial extent in simple fitting = 12.58" [Thu Jun 6 09:41:18 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064 [Thu Jun 6 09:41:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.58" [Thu Jun 6 09:42:38 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_src1.ximg exists [Thu Jun 6 09:42:38 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_src1_1.ximg exists [Thu Jun 6 09:42:38 2013] Fit fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_src1 appears to have run properly [Thu Jun 6 09:42:38 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu Jun 6 09:42:38 2013] fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu Jun 6 09:42:38 2013] Fit fullrun_mos2_xmm0111281301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Thu Jun 6 09:42:39 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.006969 pixels away [Thu Jun 6 09:42:39 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:42:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:42:39 2013] Assessing source extent using major [Thu Jun 6 09:42:39 2013] Source does appear to be extended [Thu Jun 6 09:42:39 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:43:31 2013] XMMSAS src. selection expression = ellipse(27104.957214, 11191.987350, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 09:43:31 2013] Writing source region out to fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_src.reg [Thu Jun 6 09:43:31 2013] Extracting stamp from image fullrun_mos2_xmm0111281301_pi300-10000_cl_sm2.00.img.gz, (275, 92) - (350, 167) [Thu Jun 6 09:43:31 2013] XMMSAS bgd. selection expression = annulus(27104.957214, 11191.987350, 1087.500000, 2175.000000, X, Y) [Thu Jun 6 09:43:31 2013] Writing fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1.gif [Thu Jun 6 09:43:33 2013] Mean detx,y = (4846.71, -15917.11) [Thu Jun 6 09:43:34 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 09:43:49 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 09:43:50 2013] Setting source spectrum file to fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu Jun 6 09:43:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu Jun 6 09:43:50 2013] Not generating rmf since there are only 90 counts [Thu Jun 6 09:43:50 2013] rmf not generated due to insufficient counts [Thu Jun 6 09:44:12 2013] Updating aperture counts using extracted products [Thu Jun 6 09:44:12 2013] Total counts from fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 73.00 [Thu Jun 6 09:44:12 2013] Total counts from fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 235.00 [Thu Jun 6 09:44:12 2013] Got source and background scale factors 1338380.000000, 7261860.000000 [Thu Jun 6 09:44:12 2013] User source parameters: Position = (312.1, 129.2) = 13 41 21.78 -0 13 55.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 29.7 +/- 9.6 Background aperture counts = 43.3 Rate = 0.007 +/- 0.002 [Thu Jun 6 09:44:12 2013] Updating counts from extracted products [Thu Jun 6 09:44:12 2013] Set source signif. to 29.69/6.58 = 4.51 [Thu Jun 6 09:44:12 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 09:44:12 2013] Using photon index=1.80, rate=0.00687, arf fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1.arf [Thu Jun 6 09:44:12 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 09:44:12 2013] Updating source flux to 1.9e-13 [Thu Jun 6 09:44:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 09:44:15 2013] xmm0111281301/analysis//spectral/fullrun_mos2_xmm0111281301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete