[Sun May 19 16:57:51 2013] Detection parameters:
  Position = (347.7, 404.7) = 0 58 27.97 -27 51 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 12.1
  Background counts = 2.5
  Rate = 0.02 +/- 0.002

[Sun May 19 16:57:51 2013] Off-axis axis estimate = 8.49'
[Sun May 19 17:48:28 2013] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:48:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 17:48:28 2013] Initial guess for spatial extent in simple fitting = 10.68"
[Sun May 19 17:48:28 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.031
[Sun May 19 17:48:28 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.68"
[Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 19 18:13:23 2013] Fit fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 18:13:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 18:13:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 18:13:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:13:33 2013] Spatial fit model total counts = 162.871000, observed total counts = 154.000000
[Sun May 19 18:13:33 2013] Offset between fit and detection position for source 5 = 0.369096 pixels
[Sun May 19 18:13:33 2013] 153.769700 total counts/ 88.052400 bgd. counts: snr = 7.003403
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.369096 pixels
  Position = (347.3, 404.7) = 0 58 28.09 -27 51 25.0
  Extent = 6.6 (5.2-8.8)" x 3.6 (2.7-4.7)", rotation angle = 39 (19-56) degrees
  Source counts = 65.7 +/- 12.4
  Background counts = 88.1
  Rate = 0.006 +/- 0.001
[Sun May 19 18:13:33 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:13:33 2013] Assessing source extent using major axis lower bound
[Sun May 19 18:13:33 2013] Source does appear to be extended
[Sun May 19 18:13:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Sun May 19 18:59:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 18:59:03 2013] Initial guess for spatial extent in simple fitting = 5.11"
[Sun May 19 18:59:03 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.803
[Sun May 19 18:59:03 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.11"
[Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 19 19:24:50 2013] Fit fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 19:24:50 2013] Fit fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 19 19:24:59 2013] Spatial fit model total counts = 128.759000, observed total counts = 122.000000
[Sun May 19 19:24:59 2013] Offset between fit and detection position for source 5 = 0.023463 pixels
[Sun May 19 19:24:59 2013] 117.650300 total counts/ 51.986300 bgd. counts: snr = 9.107158
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.023463 pixels
  Position = (347.3, 404.7) = 0 58 28.10 -27 51 25.0
  Extent = 6.6 (5.1-9.0)" x 3.6 (2.5-5.0)", rotation angle = 37 (15-57) degrees
  Source counts = 65.7 +/- 10.8
  Background counts = 52.0
  Rate = 0.006 +/- 0.001
[Sun May 19 19:24:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 19:24:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 19:24:59 2013] Assessing source extent using major axis lower bound
[Sun May 19 19:24:59 2013] Source does appear to be extended
[Sun May 19 19:24:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sun May 19 19:53:43 2013] XMMSAS src. selection expression = ellipse(30168.412000, 35162.514600, 395.311811, 218.003406, 37.461300, X, Y)
[Sun May 19 19:53:43 2013] Writing source region out to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_src.reg
[Sun May 19 19:53:43 2013] Extracting stamp from image fullrun_mos2_xmm0111280601_pi300-10000_cl_sm2.00.img.gz, (325, 382) - (370, 427)
[Sun May 19 19:53:43 2013] XMMSAS bgd. selection expression = annulus(30168.412000, 35162.514600, 658.853019, 1317.706038, X, Y) && !ellipse(30240.268036, 34506.411591, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 19:53:43 2013] Writing fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5.gif
[Sun May 19 19:53:45 2013] Mean detx,y = (533.99, -11767.37) 
[Sun May 19 19:53:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 19:54:00 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 19:54:01 2013] Setting source spectrum file to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 19 19:54:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 19 19:57:45 2013] Not generating rmf since there are only 65 counts
[Sun May 19 19:57:45 2013] rmf not generated due to insufficient counts
[Sun May 19 20:00:01 2013] Updating aperture counts using extracted products
[Sun May 19 20:00:01 2013] Total counts from fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 73.00
[Sun May 19 20:00:01 2013] Total counts from fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 16.00
[Sun May 19 20:00:01 2013] Got source and background scale factors 273600.000000, 2533726.000000
[Sun May 19 20:00:01 2013] User source parameters:
  Position = (347.3, 404.7) = 0 58 28.10 -27 51 25.0
  Extent = 6.6 (5.1-9.0)" x 3.6 (2.5-5.0)", rotation angle = 37 (15-57) degrees
  Source aperture counts = 71.3 +/- 9.6
  Background aperture counts = 1.7
  Rate = 0.007 +/- 0.0009

[Sun May 19 20:00:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 20:00:05 2013] Using photon index=1.80, rate=0.00623, arf fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5.arf
[Sun May 19 20:00:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 20:00:05 2013] Updating source flux to 1.6e-13
[Sun May 19 20:00:07 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 20:00:08 2013] xmm0111280601/analysis//spectral/fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete