[Sun May 19 16:57:51 2013] Detection parameters: Position = (278.5, 206.8) = 0 58 50.70 -28 5 48.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 47.0 +/- 8.4 Background counts = 2.7 Rate = 0.007 +/- 0.001 [Sun May 19 16:57:51 2013] Off-axis axis estimate = 6.80' [Sun May 19 17:48:28 2013] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting [Sun May 19 17:48:28 2013] Initial guess for spatial extent in simple fitting = 9.83" [Sun May 19 17:48:28 2013] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.690 [Sun May 19 17:48:28 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.83" [Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src5.ximg exists [Sun May 19 18:13:23 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src5_1.ximg exists [Sun May 19 18:13:23 2013] Fit fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_src5 appears to have run properly [Sun May 19 18:13:24 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sun May 19 18:13:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5.csv [Sun May 19 18:13:24 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sun May 19 18:13:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5.csv [Sun May 19 18:13:24 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 18:13:33 2013] Spatial fit model total counts = 72.086800, observed total counts = 67.000000 [Sun May 19 18:13:33 2013] Offset between fit and detection position for source 11 = 0.456362 pixels [Sun May 19 18:13:33 2013] 72.230800 total counts/ 35.869000 bgd. counts: snr = 6.071357 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.456362 pixels Position = (278.3, 206.4) = 0 58 50.74 -28 5 47.8 Extent = 6.2 (4.3-8.7)" x 3.7 (2.5-8.1)", rotation angle = 15 Source counts = 36.4 +/- 8.5 Background counts = 35.9 Rate = 0.003 +/- 0.0008 [Sun May 19 18:13:33 2013] Vigneting correction estimate = 1.000000 [Sun May 19 18:13:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 18:13:33 2013] Assessing source extent using major axis lower bound [Sun May 19 18:13:33 2013] Source does appear to be extended [Sun May 19 18:13:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54 [Sun May 19 18:59:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 19 18:59:03 2013] Initial guess for spatial extent in simple fitting = 4.98" [Sun May 19 18:59:03 2013] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.648 [Sun May 19 18:59:03 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.98" [Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src5.ximg exists [Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src5_1.ximg exists [Sun May 19 19:24:50 2013] Fit fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_src5 appears to have run properly [Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Sun May 19 19:24:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5.csv [Sun May 19 19:24:50 2013] fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Sun May 19 19:24:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5.csv [Sun May 19 19:24:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 19:24:59 2013] Spatial fit model total counts = 69.716800, observed total counts = 66.000000 [Sun May 19 19:24:59 2013] Offset between fit and detection position for source 11 = 0.003111 pixels [Sun May 19 19:24:59 2013] 70.930300 total counts/ 34.721100 bgd. counts: snr = 6.145004 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.003111 pixels Position = (278.3, 206.4) = 0 58 50.74 -28 5 47.9 Extent = 6.2 (4.4-8.6)" x 3.7 (2.4-8.2)", rotation angle = 15 Source counts = 36.2 +/- 8.4 Background counts = 34.7 Rate = 0.003 +/- 0.0008 [Sun May 19 19:24:59 2013] Vigneting correction estimate = 1.000000 [Sun May 19 19:24:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 19:24:59 2013] Assessing source extent using major axis lower bound [Sun May 19 19:24:59 2013] Source does appear to be extended [Sun May 19 19:24:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.53 [Sun May 19 19:53:43 2013] XMMSAS src. selection expression = ellipse(24166.396600, 17906.194000, 371.207411, 221.968206, 15.486465, X, Y) [Sun May 19 19:53:43 2013] Writing source region out to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_src.reg [Sun May 19 19:53:43 2013] Extracting stamp from image fullrun_mos2_xmm0111280601_pi300-10000_cl_sm2.00.img.gz, (257, 185) - (300, 228) [Sun May 19 19:53:43 2013] XMMSAS bgd. selection expression = annulus(24166.396600, 17906.194000, 618.679018, 1237.358036, X, Y) [Sun May 19 19:53:43 2013] Writing fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11.gif [Sun May 19 19:54:49 2013] Mean detx,y = (3466.78, 6231.19) [Sun May 19 19:54:50 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 19 19:55:05 2013] Binned source spectrum to 10 counts/bin [Sun May 19 19:55:05 2013] Setting source spectrum file to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sun May 19 19:55:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_bgd.pi.gz [Sun May 19 19:58:10 2013] Not generating rmf since there are only 36 counts [Sun May 19 19:58:10 2013] rmf not generated due to insufficient counts [Sun May 19 20:00:02 2013] Updating aperture counts using extracted products [Sun May 19 20:00:02 2013] Total counts from fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 37.00 [Sun May 19 20:00:02 2013] Total counts from fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 51.00 [Sun May 19 20:00:02 2013] Got source and background scale factors 206039.000000, 3202859.000000 [Sun May 19 20:00:02 2013] User source parameters: Position = (278.3, 206.4) = 0 58 50.74 -28 5 47.9 Extent = 6.2 (4.4-8.6)" x 3.7 (2.4-8.2)", rotation angle = 15 Source aperture counts = 33.7 +/- 7.1 Background aperture counts = 3.3 Rate = 0.003 +/- 0.0007 [Sun May 19 20:00:05 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 19 20:00:05 2013] Using photon index=1.80, rate=0.00343, arf fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11.arf [Sun May 19 20:00:05 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 19 20:00:05 2013] Updating source flux to 8.3e-14 [Sun May 19 20:00:07 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 19 20:00:08 2013] xmm0111280601/analysis//spectral/fullrun_mos2_xmm0111280601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete