[Sun May 19 16:57:30 2013] Detection parameters:
  Position = (219.5, 376.5) = 0 59 10.03 -27 53 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.2 +/- 5.4
  Background counts = 1.4
  Rate = 0.003 +/- 0.001

[Sun May 19 16:57:31 2013] Off-axis axis estimate = 8.05'
[Sun May 19 17:33:00 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:33:00 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sun May 19 17:33:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 17, frac = 0.504
[Sun May 19 17:33:00 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.45"
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8.csv
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8.csv
[Sun May 19 17:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 19 17:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:13:30 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.869031 pixels away
[Sun May 19 18:13:30 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:13:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:13:30 2013] Assessing source extent using major
[Sun May 19 18:13:30 2013] Source does appear to be extended
[Sun May 19 18:13:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:46:45 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun May 19 18:46:45 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sun May 19 18:46:45 2013] source mask rpix=2.4, npix_max = 33, mask sum = 17, frac = 0.504
[Sun May 19 18:46:45 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.45"
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7.csv
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7.csv
[Sun May 19 18:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 19 18:59:03 2013] Fit fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 19 19:24:57 2013] Spatial fit model total counts = 45.383100, observed total counts = 41.000000
[Sun May 19 19:24:57 2013] Offset between fit and detection position for source 7 = 0.841144 pixels
[Sun May 19 19:24:57 2013] 46.200500 total counts/ 36.239900 bgd. counts: snr = 1.654596
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.841144 pixels
  Position = (219.7, 377.3) = 0 59 9.95 -27 53 24.4
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 10.0 +/- 6.8
  Background counts = 36.2
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability