[Sun May 19 16:57:30 2013] Detection parameters:
  Position = (266.3, 265.0) = 0 58 54.69 -28 1 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.1 +/- 14.5
  Background counts = 3.8
  Rate = 0.01 +/- 0.001

[Sun May 19 16:57:31 2013] Off-axis axis estimate = 3.36'
[Sun May 19 17:33:00 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:33:00 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Sun May 19 17:33:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.894
[Sun May 19 17:33:00 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.11"
[Sun May 19 17:48:27 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 19 17:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2.csv
[Sun May 19 17:48:27 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 19 17:48:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2.csv
[Sun May 19 17:48:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 19 17:48:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 19 17:48:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:13:30 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.072736 pixels away
[Sun May 19 18:13:30 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:13:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:13:30 2013] Assessing source extent using major
[Sun May 19 18:13:30 2013] Source does appear to be extended
[Sun May 19 18:13:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 18:46:45 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sun May 19 18:46:45 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Sun May 19 18:46:45 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.894
[Sun May 19 18:46:45 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.11"
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2.csv
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2.csv
[Sun May 19 18:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 19 18:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 19:24:57 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.072736 pixels away
[Sun May 19 19:24:57 2013] Vigneting correction estimate = 1.000000
[Sun May 19 19:24:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 19:24:57 2013] Assessing source extent using major
[Sun May 19 19:24:57 2013] Source does appear to be extended
[Sun May 19 19:24:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 19:46:36 2013] XMMSAS src. selection expression = ellipse(23119.216614, 23007.540771, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 19:46:36 2013] Writing source region out to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_src.reg
[Sun May 19 19:46:36 2013] Extracting stamp from image fullrun_mos1_xmm0111280601_pi300-10000_cl_sm2.00.img.gz, (229, 228) - (304, 303)
[Sun May 19 19:46:36 2013] XMMSAS bgd. selection expression = annulus(23119.216614, 23007.540771, 1087.500000, 2175.000000, X, Y) && !ellipse(24824.692540, 23962.742000, 768.471222, 768.471222, 0.000000, X, Y)
[Sun May 19 19:46:36 2013] Writing fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3.gif
[Sun May 19 19:46:55 2013] Mean detx,y = (2492.30, -233.39) 
[Sun May 19 19:46:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 19:47:07 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 19:47:07 2013] Setting source spectrum file to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 19 19:47:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 19 19:52:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 19:52:46 2013] rmf not generated due to insufficient counts
[Sun May 19 19:59:59 2013] Updating aperture counts using extracted products
[Sun May 19 19:59:59 2013] Total counts from fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 140.00
[Sun May 19 19:59:59 2013] Total counts from fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 199.00
[Sun May 19 19:59:59 2013] Got source and background scale factors 1273592.000000, 9098628.000000
[Sun May 19 19:59:59 2013] User source parameters:
  Position = (266.3, 265.0) = 0 58 54.69 -28 1 32.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 112.1 +/- 12.9
  Background aperture counts = 27.9
  Rate = 0.01 +/- 0.001

[Sun May 19 19:59:59 2013] Updating counts from extracted products
[Sun May 19 19:59:59 2013] Set source signif. to 112.14/5.28 = 21.25
[Sun May 19 20:00:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 20:00:01 2013] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3.arf
[Sun May 19 20:00:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 20:00:01 2013] Updating source flux to 1.1e-13
[Sun May 19 20:00:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 20:00:07 2013] xmm0111280601/analysis//spectral/fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete