[Sun May 19 16:57:31 2013] Detection parameters:
  Position = (415.8, 423.1) = 0 58 5.62 -27 50 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.7 +/- 6.2
  Background counts = 1.8
  Rate = 0.002 +/- 0.0006

[Sun May 19 16:57:31 2013] Off-axis axis estimate = 12.41'
[Sun May 19 17:33:00 2013] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:33:00 2013] Initial guess for spatial extent in simple fitting = 12.64"
[Sun May 19 17:33:00 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Sun May 19 17:33:00 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.64"
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 19 17:48:28 2013] Fit fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_src10 appears to have run properly
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 19 17:48:28 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 19 17:48:28 2013] Fit fullrun_mos1_xmm0111280601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun May 19 18:13:30 2013] Spatial fit model total counts = 35.812300, observed total counts = 37.000000
[Sun May 19 18:13:30 2013] Offset between fit and detection position for source 12 = 2.188727 pixels
[Sun May 19 18:13:30 2013] 34.426790 total counts/ 9.164090 bgd. counts: snr = 8.345168
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.188727 pixels
  Position = (414.1, 424.4) = 0 58 6.20 -27 49 59.2
  Extent = 15.3 (10.5-23.4)" x 4.3 (3.2-6.8)", rotation angle = 51 (40-60) degrees
  Source counts = 25.3 +/- 5.9
  Background counts = 9.2
  Rate = 0.002 +/- 0.0006
[Sun May 19 18:13:30 2013] Vigneting correction estimate = 1.000000
[Sun May 19 18:13:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 18:13:30 2013] Assessing source extent using major axis lower bound
[Sun May 19 18:13:30 2013] Source does appear to be extended
[Sun May 19 18:13:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Sun May 19 18:13:30 2013] Source is asymmetric
[Sun May 19 18:46:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 18:46:45 2013] Initial guess for spatial extent in simple fitting = 9.83"
[Sun May 19 18:46:45 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Sun May 19 18:46:45 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.83"
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9.csv
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9.csv
[Sun May 19 18:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 18:59:03 2013] fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 19 18:59:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 19 18:59:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 19:24:57 2013] Warning, spatial fit 9 centroid is now closest to src. 4
[Sun May 19 19:24:57 2013] Vigneting correction estimate = 1.000000
[Sun May 19 19:24:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 19:24:57 2013] Assessing source extent using major axis lower bound
[Sun May 19 19:24:57 2013] Source does appear to be extended
[Sun May 19 19:24:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Sun May 19 19:24:57 2013] Source is asymmetric
[Sun May 19 19:46:36 2013] XMMSAS src. selection expression = ellipse(35977.908000, 36872.125000, 919.656026, 259.887607, 50.742891, X, Y)
[Sun May 19 19:46:36 2013] Writing source region out to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_src.reg
[Sun May 19 19:46:36 2013] Extracting stamp from image fullrun_mos1_xmm0111280601_pi300-10000_cl_sm2.00.img.gz, (361, 372) - (467, 477)
[Sun May 19 19:46:36 2013] XMMSAS bgd. selection expression = annulus(35977.908000, 36872.125000, 1532.760044, 3065.520088, X, Y)
[Sun May 19 19:46:36 2013] Writing fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12.gif
[Sun May 19 19:48:41 2013] Mean detx,y = (-15773.19, -5098.75) 
[Sun May 19 19:48:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 19:49:05 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 19:49:05 2013] Setting source spectrum file to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 19 19:49:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 19 19:53:30 2013] Not generating rmf since there are only 25 counts
[Sun May 19 19:53:30 2013] rmf not generated due to insufficient counts
[Sun May 19 20:00:00 2013] Updating aperture counts using extracted products
[Sun May 19 20:00:00 2013] Total counts from fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 16.00
[Sun May 19 20:00:01 2013] Total counts from fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_bgd.pi.gz = 97.00
[Sun May 19 20:00:01 2013] Got source and background scale factors 623292.000000, 9299536.000000
[Sun May 19 20:00:01 2013] User source parameters:
  Position = (414.1, 424.4) = 0 58 6.20 -27 49 59.2
  Extent = 15.3 (10.5-23.4)" x 4.3 (3.2-6.8)", rotation angle = 51 (40-60) degrees
  Source aperture counts = 9.5 +/- 5.1
  Background aperture counts = 6.5
  Rate = 0.0009 +/- 0.0005

[Sun May 19 20:00:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 20:00:01 2013] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12.arf
[Sun May 19 20:00:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 20:00:01 2013] Updating source flux to 8e-14
[Sun May 19 20:00:06 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 20:00:07 2013] xmm0111280601/analysis//spectral/fullrun_mos1_xmm0111280601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete