[Mon May 27 00:59:27 2013] Detection parameters:
  Position = (255.5, 357.3) = 0 58 58.98 -27 30 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.7 +/- 7.5
  Background counts = 7.0
  Rate = 0.008 +/- 0.002

[Mon May 27 00:59:27 2013] Off-axis axis estimate = 5.29'
[Mon May 27 01:01:22 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 01:01:22 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Mon May 27 01:01:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Mon May 27 01:01:22 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.07"
[Mon May 27 01:33:33 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 27 01:33:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13.csv
[Mon May 27 01:33:33 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 27 01:33:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13.csv
[Mon May 27 01:33:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 01:33:34 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 27 01:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 27 01:33:34 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 27 01:33:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 27 01:33:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111280301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 02:10:04 2013] Warning, spatial fit 13 centroid is now closest to src. 2
[Mon May 27 02:10:04 2013] Vigneting correction estimate = 1.000000
[Mon May 27 02:10:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 02:10:04 2013] Assessing source extent using major
[Mon May 27 02:10:04 2013] Source does appear to be extended
[Mon May 27 02:10:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 02:10:20 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:10:20 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Mon May 27 02:10:20 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Mon May 27 02:10:20 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.07"
[Mon May 27 02:43:27 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 27 02:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13.csv
[Mon May 27 02:43:27 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 27 02:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13.csv
[Mon May 27 02:43:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 02:43:27 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 27 02:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 27 02:43:27 2013] fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 27 02:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 27 02:43:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111280301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:22:30 2013] Warning, spatial fit 13 centroid is now closest to src. 2
[Mon May 27 03:22:30 2013] Vigneting correction estimate = 1.000000
[Mon May 27 03:22:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 03:22:30 2013] Assessing source extent using major
[Mon May 27 03:22:30 2013] Source does appear to be extended
[Mon May 27 03:22:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 03:22:45 2013] XMMSAS src. selection expression = ellipse(22178.907455, 31040.520416, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 03:22:45 2013] Writing source region out to fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_src.reg
[Mon May 27 03:22:45 2013] Extracting stamp from image fullrun_pn_xmm0111280301_pi300-10000_cl_sm2.00.img.gz, (218, 320) - (293, 395)
[Mon May 27 03:22:45 2013] XMMSAS bgd. selection expression = annulus(22178.907455, 31040.520416, 1087.500000, 2175.000000, X, Y) && !ellipse(21731.481918, 30426.560822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.329600, 29798.768600, 482.741614, 482.741614, 0.000000, X, Y)
[Mon May 27 03:22:45 2013] Writing fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13.gif
[Mon May 27 03:30:58 2013] Mean detx,y = (4225.24, 4925.51) 
[Mon May 27 03:31:02 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 03:31:32 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 03:31:33 2013] Setting source spectrum file to fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May 27 03:31:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May 27 03:37:39 2013] Not generating rmf since there are only 25 counts
[Mon May 27 03:37:39 2013] rmf not generated due to insufficient counts
[Mon May 27 03:50:03 2013] Updating aperture counts using extracted products
[Mon May 27 03:50:03 2013] Total counts from fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 59.00
[Mon May 27 03:50:03 2013] Total counts from fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 121.00
[Mon May 27 03:50:03 2013] Got source and background scale factors 1242162.000000, 8056835.000000
[Mon May 27 03:50:03 2013] User source parameters:
  Position = (255.5, 357.3) = 0 58 58.98 -27 30 35.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.3 +/- 8.7
  Background aperture counts = 18.7
  Rate = 0.01 +/- 0.002

[Mon May 27 03:50:03 2013] Updating counts from extracted products
[Mon May 27 03:50:03 2013] Set source signif. to 40.34/4.32 = 9.34
[Mon May 27 03:50:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 03:50:04 2013] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13.arf
[Mon May 27 03:50:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 03:50:04 2013] Updating source flux to 3.9e-14
[Mon May 27 03:50:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 03:50:15 2013] xmm0111280301/analysis//spectral/fullrun_pn_xmm0111280301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete