[Sat Aug 11 10:22:34 2012] Detection parameters:
  Position = (204.3, 462.4) = 0 55 42.83 -27 23 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 13.6
  Background counts = 26.3
  Rate = 0.007 +/- 0.001

[Sat Aug 11 10:22:34 2012] Off-axis axis estimate = 13.71'
[Sat Aug 11 10:30:48 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:30:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 10:30:48 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Sat Aug 11 10:30:48 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Sat Aug 11 10:30:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.28"
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 10:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 10:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 10:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 10:36:47 2012] Fit fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 10:42:42 2012] Spatial fit model total counts = 230.090000, observed total counts = 214.000000
[Sat Aug 11 10:42:42 2012] Offset between fit and detection position for source 3 = 1.094560 pixels
[Sat Aug 11 10:42:42 2012] 228.814000 total counts/ 179.640000 bgd. counts: snr = 3.668884
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.094560 pixels
  Position = (203.6, 463.2) = 0 55 43.05 -27 23 15.9
  Extent = 15.9 (3.3-26.6)", rotation angle = 0
  Source counts = 49.2 +/- 15.1
  Background counts = 179.6
  Rate = 0.01 +/- 0.004
[Sat Aug 11 10:42:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:42:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:42:42 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 10:42:42 2012] Source does appear to be extended
[Sat Aug 11 10:42:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 10:48:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:48:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 10:48:52 2012] Initial guess for spatial extent in simple fitting = 15.94"
[Sat Aug 11 10:48:52 2012] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.038
[Sat Aug 11 10:48:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.94"
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 10:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 11 10:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:58:55 2012] Spatial fit model total counts = 340.028000, observed total counts = 279.000000
[Sat Aug 11 10:58:55 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 11 10:58:55 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:58:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:58:55 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 10:58:55 2012] Source does appear to be extended
[Sat Aug 11 10:58:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 11:01:29 2012] XMMSAS src. selection expression = ellipse(17662.618600, 40251.224380, 956.178028, 956.178028, 0.000000, X, Y)
[Sat Aug 11 11:01:29 2012] Writing source region out to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 11 11:01:29 2012] Extracting stamp from image fullrun_mos1_xmm0111280101_pi300-10000_cl_sm2.00.img.gz, (149, 408) - (259, 518)
[Sat Aug 11 11:01:29 2012] XMMSAS bgd. selection expression = annulus(17662.618600, 40251.224380, 1593.630046, 3187.260092, X, Y)
[Sat Aug 11 11:01:29 2012] Writing fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3.gif
[Sat Aug 11 11:01:32 2012] Mean detx,y = (-9435.23, 13047.41) 
[Sat Aug 11 11:01:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 11:02:03 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 11:02:04 2012] Setting source spectrum file to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 11:02:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 11 11:02:49 2012] Not generating rmf since there are only 49 counts
[Sat Aug 11 11:02:49 2012] rmf not generated due to insufficient counts
[Sat Aug 11 11:05:05 2012] Updating aperture counts using extracted products
[Sat Aug 11 11:05:05 2012] Error reading totcts from fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 11:05:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 11:05:05 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3.arf
[Sat Aug 11 11:05:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 11:05:05 2012] Updating source flux to 2.5e-13
[Sat Aug 11 11:05:06 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat Aug 11 11:05:06 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 11 11:05:07 2012] xmm0111280101/analysis//spectral/fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete