[Sat Aug 11 10:22:34 2012] Detection parameters:
  Position = (350.0, 342.0) = 0 54 55.22 -27 32 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.4 +/- 12.2
  Background counts = 26.9
  Rate = 0.007 +/- 0.001

[Sat Aug 11 10:22:34 2012] Off-axis axis estimate = 4.89'
[Sat Aug 11 10:30:48 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:30:48 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Aug 11 10:30:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.504
[Sat Aug 11 10:30:48 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.87"
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug 11 10:36:47 2012] Fit fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 11 10:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 10:36:47 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 11 10:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 10:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:42:42 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.790865 pixels away
[Sat Aug 11 10:42:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:42:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:42:42 2012] Assessing source extent using major
[Sat Aug 11 10:42:42 2012] Source does appear to be extended
[Sat Aug 11 10:42:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 10:48:52 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:48:52 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Aug 11 10:48:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.504
[Sat Aug 11 10:48:52 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.87"
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 10:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 10:54:27 2012] fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 11 10:54:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 10:54:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111280101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 10:58:55 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.854825 pixels away
[Sat Aug 11 10:58:55 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:58:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:58:55 2012] Assessing source extent using major
[Sat Aug 11 10:58:55 2012] Source does appear to be extended
[Sat Aug 11 10:58:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 11:01:29 2012] XMMSAS src. selection expression = ellipse(30397.809509, 29701.259918, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 11:01:29 2012] Writing source region out to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug 11 11:01:29 2012] Extracting stamp from image fullrun_mos1_xmm0111280101_pi300-10000_cl_sm2.00.img.gz, (312, 304) - (387, 379)
[Sat Aug 11 11:01:29 2012] XMMSAS bgd. selection expression = annulus(30397.809509, 29701.259918, 1087.500000, 2175.000000, X, Y)
[Sat Aug 11 11:01:29 2012] Writing fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2.gif
[Sat Aug 11 11:02:08 2012] Mean detx,y = (-6969.61, -3227.47) 
[Sat Aug 11 11:02:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 11:02:47 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 11:02:47 2012] Setting source spectrum file to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 11 11:02:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug 11 11:03:15 2012] Not generating rmf since there are only 68 counts
[Sat Aug 11 11:03:15 2012] rmf not generated due to insufficient counts
[Sat Aug 11 11:05:05 2012] Updating aperture counts using extracted products
[Sat Aug 11 11:05:05 2012] Error reading totcts from fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 11 11:05:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 11:05:05 2012] Using photon index=1.80, rate=0.00666, arf fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2.arf
[Sat Aug 11 11:05:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 11:05:05 2012] Updating source flux to 1.3e-13
[Sat Aug 11 11:05:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 11 11:05:07 2012] xmm0111280101/analysis//spectral/fullrun_mos1_xmm0111280101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete