[Fri Jun 15 10:29:37 2012] Detection parameters:
  Position = (316.1, 336.6) = 15 10 53.57 5 45 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2146.6 +/- 63.7
  Background counts = 306.8
  Rate = 0.2 +/- 0.006

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 3.05'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.784
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.95"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 12:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 15 12:57:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:53 2012] Spatial fit model total counts = 15937.300000, observed total counts = 9668.000000
[Fri Jun 15 14:42:53 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:11 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jun 15 14:43:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.784
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.95"
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 21:09:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:49 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.423293 pixels away
[Fri Jun 15 23:03:49 2012] Source 6 is offset by -8.991691 and -2.505821 pixels which is larger than
2 X fitted extent = 7.867265 x 7.867265, not incorporating fit results
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:04:04 2012] Counts = 2146.593750, rescaling region sizes by 2.000000
[Fri Jun 15 23:04:04 2012] XMMSAS src. selection expression = ellipse(27455.768890, 29238.039612, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 15 23:04:04 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (241, 262) - (391, 412)
[Fri Jun 15 23:04:04 2012] XMMSAS bgd. selection expression = annulus(27455.768890, 29238.039612, 4350.000000, 8700.000000, X, Y) && !ellipse(26642.901800, 27789.143600, 4871.112140, 4871.112140, 0.000000, X, Y) && !ellipse(26313.628387, 29035.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.062805, 23890.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32335.325104, 32046.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.359283, 31263.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.732000, 31170.082000, 1346.032039, 1346.032039, 0.000000, X, Y) && !ellipse(24410.529938, 30490.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.924988, 29539.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.044769, 27744.577667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.071930, 27000.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.658051, 26299.246094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.636000, 24996.184000, 2508.240072, 2508.240072, 0.000000, X, Y) && !ellipse(28752.122000, 25865.882000, 1254.120036, 1254.120036, 0.000000, X, Y) && !ellipse(28439.326000, 24172.434000, 1201.384035, 1201.384035, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y) && !ellipse(27916.270000, 20056.810000, 1479.440043, 1479.440043, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6.gif
[Fri Jun 15 23:16:13 2012] Mean detx,y = (717.56, -1173.75) 
[Fri Jun 15 23:16:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:18:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:18:14 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 15 23:18:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 16 10:28:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 10:28:59 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 17 17:10:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:34 2012] Using photon index=1.80, rate=0.206, arf fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6.arf
[Sun Jun 17 17:10:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:34 2012] Updating source flux to 5.1e-13
[Sun Jun 17 17:13:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 17 17:14:17 2012] xmm0111270201/analysis//spectral/fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete