[Fri Jun 15 10:29:38 2012] Detection parameters:
  Position = (324.0, 283.1) = 15 10 51.28 5 42 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.4 +/- 36.6
  Background counts = 289.5
  Rate = 0.04 +/- 0.003

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 2.16'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.51"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37.csv
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37.csv
[Fri Jun 15 12:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jun 15 12:57:01 2012] Fit fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Jun 15 14:42:53 2012] Spatial fit model total counts = 6055.950000, observed total counts = 6056.000000
[Fri Jun 15 14:42:53 2012] Offset between fit and detection position for source 40 = 5.846964 pixels
[Fri Jun 15 14:42:53 2012] 6069.445000 total counts/ 5839.620000 bgd. counts: snr = 3.007495
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 5.846964 pixels
  Position = (327.4, 278.4) = 15 10 50.28 5 41 41.0
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 229.8 +/- 77.9
  Background counts = 5839.6
  Rate = 0.02 +/- 0.007
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 15.02"
[Fri Jun 15 14:43:11 2012] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.024
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 15.02"
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 15 21:09:59 2012] Fit fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jun 15 23:03:49 2012] Warning, spatial fit 25 centroid is now closest to src. 41
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:49 2012] Source is confused with source 35
[Fri Jun 15 23:04:05 2012] XMMSAS src. selection expression = ellipse(28439.326000, 24172.434000, 901.038026, 901.038026, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40_src.reg
[Fri Jun 15 23:04:05 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (276, 227) - (379, 330)
[Fri Jun 15 23:04:05 2012] XMMSAS bgd. selection expression = annulus(28439.326000, 24172.434000, 1501.730043, 3003.460086, X, Y) && !ellipse(26642.901800, 27789.143600, 4871.112140, 4871.112140, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.636000, 24996.184000, 2508.240072, 2508.240072, 0.000000, X, Y) && !ellipse(28752.122000, 25865.882000, 1254.120036, 1254.120036, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y) && !ellipse(27916.270000, 20056.810000, 1479.440043, 1479.440043, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40.gif
[Fri Jun 15 23:33:57 2012] Mean detx,y = (1077.44, 3507.01) 
[Fri Jun 15 23:33:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:34:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:34:16 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jun 15 23:34:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jun 17 17:10:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:35 2012] Using photon index=1.80, rate=0.0204, arf fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src40.arf
[Sun Jun 17 17:10:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:35 2012] Updating source flux to 5.4e-14
[Sun Jun 17 17:13:14 2012] Flag c found in src. 40 procflags, skipping spectral fitting