[Fri Jun 15 10:29:38 2012] Detection parameters:
  Position = (343.0, 294.1) = 15 10 45.74 5 42 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 26.8
  Background counts = 253.5
  Rate = 0.01 +/- 0.002

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 3.25'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.724
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.05"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32.csv
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32.csv
[Fri Jun 15 12:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 15 12:57:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:53 2012] Warning, spatial fit 32 centroid is now closest to src. 38
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:11 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Jun 15 14:43:11 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.724
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.05"
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:49 2012] Warning, spatial fit 22 centroid is now closest to src. 38
[Fri Jun 15 23:03:49 2012] Spatial fit model total counts = 15280.000000, observed total counts = 15287.000000
[Fri Jun 15 23:03:49 2012] Offset between fit and detection position for source 35 = 6.464523 pixels
[Fri Jun 15 23:03:49 2012] Warning, changing simple spatial fit ID from 22 to 24
[Fri Jun 15 23:03:49 2012] 15065.050000 total counts/ 12978.900000 bgd. counts: snr = 18.311612
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.464523 pixels
  Position = (341.3, 287.9) = 15 10 46.25 5 42 22.2
  Extent = 31.4 (31.3-62.7)", rotation angle = 0
  Source counts = 2086.2 +/- 122.7
  Background counts = 12978.9
  Rate = 0.2 +/- 0.01
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:49 2012] Source is confused with source 38
[Fri Jun 15 23:03:49 2012] Source is confused with source 40
[Fri Jun 15 23:03:49 2012] Source is confused with source 41
[Fri Jun 15 23:04:05 2012] Counts = 2086.150000, rescaling region sizes by 2.000000
[Fri Jun 15 23:04:05 2012] XMMSAS src. selection expression = ellipse(29640.636000, 24996.184000, 3762.360108, 3762.360108, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35_src.reg
[Fri Jun 15 23:04:05 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (125, 72) - (557, 504)
[Fri Jun 15 23:04:05 2012] XMMSAS bgd. selection expression = annulus(29640.636000, 24996.184000, 12541.200361, 25082.400722, X, Y) && !ellipse(26642.901800, 27789.143600, 4871.112140, 4871.112140, 0.000000, X, Y) && !ellipse(26313.628387, 29035.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.062805, 23890.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.768890, 29238.039612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32335.325104, 32046.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.359283, 31263.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.732000, 31170.082000, 1346.032039, 1346.032039, 0.000000, X, Y) && !ellipse(24410.529938, 30490.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.924988, 29539.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.044769, 27744.577667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.071930, 27000.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.658051, 26299.246094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28752.122000, 25865.882000, 1254.120036, 1254.120036, 0.000000, X, Y) && !ellipse(28439.326000, 24172.434000, 1201.384035, 1201.384035, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y) && !ellipse(27916.270000, 20056.810000, 1479.440043, 1479.440043, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35.gif
[Fri Jun 15 23:23:48 2012] Mean detx,y = (1028.20, 1550.17) 
[Fri Jun 15 23:23:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:33:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:33:15 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jun 15 23:33:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Jun 17 17:10:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:35 2012] Using photon index=1.80, rate=0.185, arf fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src35.arf
[Sun Jun 17 17:10:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:35 2012] Updating source flux to 4.3e-13
[Sun Jun 17 17:13:14 2012] Flag c found in src. 35 procflags, skipping spectral fitting