[Fri Jun 15 10:29:38 2012] Detection parameters:
  Position = (281.6, 302.8) = 15 11 3.64 5 43 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.6 +/- 23.5
  Background counts = 275.9
  Rate = 0.03 +/- 0.003

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 1.26'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.721
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.06"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jun 15 12:57:00 2012] Fit fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src29 appears to have run properly
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri Jun 15 12:57:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:53 2012] Warning, spatial fit 29 centroid is now closest to src. 29
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:42:53 2012] Source is confused with source 33
[Fri Jun 15 14:43:11 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Fri Jun 15 14:43:11 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.721
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.06"
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20.csv
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20.csv
[Fri Jun 15 21:09:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:49 2012] Source 31 is offset by -5.891999 and -3.624735 pixels which is larger than
2 X fitted extent = 2.140041 x 6.491494, not incorporating fit results
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:04:05 2012] XMMSAS src. selection expression = ellipse(24450.658051, 26299.246094, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 15 23:04:05 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (244, 265) - (319, 340)
[Fri Jun 15 23:04:05 2012] XMMSAS bgd. selection expression = annulus(24450.658051, 26299.246094, 1087.500000, 2175.000000, X, Y) && !ellipse(26642.901800, 27789.143600, 4871.112140, 4871.112140, 0.000000, X, Y) && !ellipse(26313.628387, 29035.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.062805, 23890.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.768890, 29238.039612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.044769, 27744.577667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.071930, 27000.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y)
[Fri Jun 15 23:04:05 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31.gif
[Fri Jun 15 23:22:04 2012] Mean detx,y = (-2425.94, 821.96) 
[Fri Jun 15 23:22:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:22:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:22:26 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 15 23:22:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun 16 11:21:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 11:21:20 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jun 17 17:10:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:35 2012] Using photon index=1.80, rate=0.0255, arf fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src31.arf
[Sun Jun 17 17:10:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:35 2012] Updating source flux to 1.3e-13
[Sun Jun 17 17:13:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting