[Fri Jun 15 10:29:37 2012] Detection parameters:
  Position = (303.0, 334.3) = 15 10 57.39 5 45 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4799.5 +/- 90.4
  Background counts = 315.0
  Rate = 0.4 +/- 0.008

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 2.62'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.963
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.74"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 12:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 12:57:01 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 15 12:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 12:57:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:53 2012] Spatial fit model total counts = 29345.900000, observed total counts = 20571.000000
[Fri Jun 15 14:42:53 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:11 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Fri Jun 15 14:43:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.963
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.74"
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 21:09:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 15 21:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 21:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:49 2012] Spatial fit model total counts = 35354.900000, observed total counts = 20571.000000
[Fri Jun 15 23:03:49 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:04:04 2012] Counts = 4799.505371, rescaling region sizes by 2.000000
[Fri Jun 15 23:04:04 2012] XMMSAS src. selection expression = ellipse(26313.628387, 29035.006866, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 23:04:04 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (228, 259) - (378, 409)
[Fri Jun 15 23:04:04 2012] XMMSAS bgd. selection expression = annulus(26313.628387, 29035.006866, 4350.000000, 8700.000000, X, Y) && !ellipse(26642.901800, 27789.143600, 4871.112140, 4871.112140, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.062805, 23890.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.768890, 29238.039612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32335.325104, 32046.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.359283, 31263.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.732000, 31170.082000, 1346.032039, 1346.032039, 0.000000, X, Y) && !ellipse(24410.529938, 30490.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.924988, 29539.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.044769, 27744.577667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.071930, 27000.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.658051, 26299.246094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.636000, 24996.184000, 2508.240072, 2508.240072, 0.000000, X, Y) && !ellipse(28752.122000, 25865.882000, 1254.120036, 1254.120036, 0.000000, X, Y) && !ellipse(28439.326000, 24172.434000, 1201.384035, 1201.384035, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y) && !ellipse(27916.270000, 20056.810000, 1479.440043, 1479.440043, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 23:10:32 2012] Mean detx,y = (-103.71, -1047.87) 
[Fri Jun 15 23:10:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:12:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:13:00 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 23:13:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 16 09:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 09:52:01 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 17 17:10:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:34 2012] Using photon index=1.80, rate=0.45, arf fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2.arf
[Sun Jun 17 17:10:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:34 2012] Updating source flux to 1.1e-12
[Sun Jun 17 17:13:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 17 17:14:17 2012] xmm0111270201/analysis//spectral/fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete