[Fri Jun 15 10:29:37 2012] Detection parameters:
  Position = (307.3, 320.0) = 15 10 56.16 5 44 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27375.2 +/- 201.8
  Background counts = 369.8
  Rate = 2 +/- 0.02

[Fri Jun 15 10:29:39 2012] Off-axis axis estimate = 1.69'
[Fri Jun 15 10:33:46 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:33:46 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun 15 10:33:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Jun 15 10:33:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 12:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 12:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 12:57:00 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 12:57:01 2012] Fit fullrun_pn_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 14:42:53 2012] Spatial fit model total counts = 68608.900000, observed total counts = 73479.000000
[Fri Jun 15 14:42:53 2012] Offset between fit and detection position for source 1 = 0.299793 pixels
[Fri Jun 15 14:42:53 2012] 68127.200000 total counts/ 25600.000000 bgd. counts: snr = 265.795000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.299793 pixels
  Position = (307.1, 320.2) = 15 10 56.22 5 44 43.0
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 42527.2 +/- 261.0
  Background counts = 25600.0
  Rate = 4 +/- 0.02
[Fri Jun 15 14:42:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:42:53 2012] Source does appear to be extended
[Fri Jun 15 14:42:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:43:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 14:43:11 2012] Initial guess for spatial extent in simple fitting = 14.55"
[Fri Jun 15 14:43:11 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.083
[Fri Jun 15 14:43:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.55"
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 21:09:58 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 21:09:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 21:09:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 21:09:59 2012] fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 21:09:59 2012] Fit fullrun_pn_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 23:03:49 2012] Spatial fit model total counts = 130162.000000, observed total counts = 120755.000000
[Fri Jun 15 23:03:49 2012] Offset between fit and detection position for source 1 = 0.370629 pixels
[Fri Jun 15 23:03:49 2012] 130849.100000 total counts/ 72687.300000 bgd. counts: snr = 215.729020
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.370629 pixels
  Position = (306.8, 320.0) = 15 10 56.29 5 44 41.9
  Extent = 20.3 (20.1-20.6)", rotation angle = 0
  Source counts = 58161.8 +/- 361.7
  Background counts = 72687.3
  Rate = 5 +/- 0.03
[Fri Jun 15 23:03:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:49 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:49 2012] Source does appear to be extended
[Fri Jun 15 23:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:04:04 2012] Counts = 58161.800000, rescaling region sizes by 3.000000
[Fri Jun 15 23:04:04 2012] XMMSAS src. selection expression = ellipse(26642.901800, 27789.143600, 3653.334105, 3653.334105, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing source region out to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 23:04:04 2012] Extracting stamp from image fullrun_pn_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (97, 110) - (517, 530)
[Fri Jun 15 23:04:04 2012] XMMSAS bgd. selection expression = annulus(26642.901800, 27789.143600, 18266.670526, 36533.341051, X, Y) && !ellipse(26313.628387, 29035.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.625641, 25530.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.062805, 23890.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.768890, 29238.039612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32335.325104, 32046.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.359283, 31263.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.732000, 31170.082000, 1346.032039, 1346.032039, 0.000000, X, Y) && !ellipse(24410.529938, 30490.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29186.924988, 29539.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.044769, 27744.577667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.071930, 27000.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.658051, 26299.246094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.955261, 25894.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.324341, 25190.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.636000, 24996.184000, 2508.240072, 2508.240072, 0.000000, X, Y) && !ellipse(28752.122000, 25865.882000, 1254.120036, 1254.120036, 0.000000, X, Y) && !ellipse(28439.326000, 24172.434000, 1201.384035, 1201.384035, 0.000000, X, Y) && !ellipse(27943.242000, 25075.440000, 2402.768069, 2402.768069, 0.000000, X, Y) && !ellipse(27916.270000, 20056.810000, 1479.440043, 1479.440043, 0.000000, X, Y)
[Fri Jun 15 23:04:04 2012] Writing fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 23:04:24 2012] Mean detx,y = (103.76, -78.72) 
[Fri Jun 15 23:04:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:10:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:10:12 2012] Setting source spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 23:10:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 17 17:10:34 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:34 2012] Error reading totcts from fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 17:10:34 2012] No arf file for this source, not re-computing flux
[Sun Jun 17 17:13:14 2012] Source 1 has no response, skipping
[Sun Jun 17 17:14:17 2012] xmm0111270201/analysis//spectral/fullrun_pn_xmm0111270201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete